Jump to content

Recommended Posts

Whatever happened to the X70? I don't currently own any Fujifilm camera, but I'm looking for a new small camera for travel. I have a list of "wants", and while the X70 doesn't tick all my boxes, it certainly looks like a nice option, especially combined with the optional optical viewfinder and wide converter lens.

 

The X100 series looks even better of course, and I keep re-considering it, but the 28mm equivalent when combined with the WCL-X100 is just not wide enough, and so rules the camera out.

Edited by osullic
Link to post
Share on other sites

  • 4 weeks later...

The X100 cameras have a 23mm lens, which, on an APS-C sensor, provides about the same angle of view as a 35mm lens does on a full-frame camera.

Paired with the WCL-X100, which is a 0.8x wide-angle converter, the X100 captures an angle of view about the same as a 28mm lens on a full-frame camera.

I would like a wider angle of view - something like what you get with a 24mm or 25mm lens on a full-frame body. The X70 looked interesting because, paired with its own WCL-X70 wide-angle converter, it captured an angle of view equivalent to a 21mm lens on a full-frame camera. But angles of view this wide are not possible with the X100 cameras.

Edited by osullic
Link to post
Share on other sites

I LOVE my X70. But where is our X80? The sensor and processor need updating. But this truly pocketable APS-C X-Trans sensor -with tilting screen- is amazing. It’s just as capable as any of its bigger siblings in terms of IQ making it maybe, the highest quality image maker for its size that there is. C’mon Fuji! Get on it.

Link to post
Share on other sites

  • 2 months later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software  to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
    • How does one make sure that Fuji's image correction is turned on to correct barrel and pin-cushion distortion on a GFX 100 or GFX100S when using the GF20-35? Is it only applied to the jpegs and not to the raw files? (I was surprised to discover the barrel distortion on the GF 35-70mm lens.) I normally shoot in raw with jpeg back-up and use the raw files, which I convert either in Affinity Photo 2 when editing with that program or in Raw File Converter Ex 3.0 by Silkypix if I wish to process the image in Photoshop CS6. (Adobe DNG is also a possibility.) Thank you for the help. Trevor
    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...