Jump to content

Recommended Posts

HI guys,

 

Did you ever wonder why 10-24 doesn't have fixed aperture values on it's aperture ring like other lenses with constant aperture? The answer is that 10-24 have actually variable aperture! But it slows it down by 4/3 f-stop on wide end. You can see that by looking through the front element of the lens while shooting wide open on 10mm.

I found a way to shoot on f2.5 but it's not too reliable and may broke lens or camera. I believe it's possible to do the same by firmware update.

So how does it perform on f2.5? Lens becomes slightly soft and there is some vignetting. I'm not sure if that is why Fuji decided to restrict it to f4 only. It also can be because on 14mm it becomes f2.8 - the exact the same as XF 14 2.8 prime lens. So it can be marketing restrictions.

I did a quick test just to see how different can be DOF on 2.5 vs 4. Test conditions and scene are not too accurate, I'm going to do a proper test when I have enough time.

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

There is an easer way.

You can just push lens release button and rotate the lens a bit but not detach it. 

 

You need to focus on 10mm first, zoom to 24mm and do the above. Then zoom back to 10mm. Unfortunately focus will not be in the same position and focus ring won't work. So move camera further or close to find proper focus distance.

 

Of course, make sure you turn on Preview Exp in manual option, and set aperture to actual 4.0. UPD, also enable Shoot without lens option.

 

Note, you may damage your camera or lens as it's not recommended to detach the lens while camera is switched on. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
×
×
  • Create New...