Jump to content

Recommended Posts

Been fumbling my way through settings etc for a number of years with some ok results and some not, went on holiday to Vegas last year and decided to take the camera, took some on auto and some on manual etc,  on auto the night and even some of the day shots were just ok,    visiting again this year, any advice regarding settings, followed  the instructions I got with it but failed miserably as it's not a place you can just stop and have a read of the booklet.Thanks

Link to post
Share on other sites

  • 1 month later...

It seems that you have something specific in mind, but the information you are giving us to work with is so vague that it is difficult to know where to start saying things to help you.

Can you post an image and say what you wanted it to show and why you think it does not get there? Make sure to include the settings you used at that time.

Link to post
Share on other sites

If you want general settings for walking around in an urban environment (such as your trip to vegas);

Use aperture priority and use a medium aperture (f5.6 or f8)

Use auto-ISO and a range such as 200-6400

Use single-point autofocus with the focus point centred (focus and recompose)

Use Preview Picture Effect so that you see under and overexposure in the viewfinder

Use either a general purpose zoom such as the kit 18-55, or a compact prime lens such as the XF 18/2 or XF 23/2

----

Vary these basics as you gain experience and knowledge and need specific settings for particular circumstances.

EG. Use the faster prime lens, f2 wide open in low light situations such as indoors or at night.

Practice often, take the camera and lens out with you when you leave home, make the sort of photos you want to make on your trip in your home territory. Be a tourist in your own town/city/area. Become accustomed to the camera and lens and how it behaves in different circumstances, learn to adjust it to get the results you want. Then when you travel you will not need to think about the basics of camera operation and can focus on the place and the photos you want to make.

Link to post
Share on other sites

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Hy there When Im using the fan001 on the XH2s and I flip the LCD Screen vertically by 180 degrees then the image flips vertically, what is good but it also flips horizontally. The clean feed on HDMI is not flipping horizontally but its also flipping if the HDMI output info display is on. When I unmount the fan then the image flips only vertically. My firmware is updated to the latest version. Any ideas if there is a fix for that?
    • In reply to the original question, it all depends on what you mean by infrared.  If you mean "see thermal information", then I agree with the comments here.  However, if you mean near-infrared, the X-T4, or basically any digital camera can be modified to "see" it.  Check out Lifepixel.com and Kolarivision.com for more info. As regards lenses, I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • No - I don’t think so - it means you can take pictures if you remove the lens completely - but I’m not sure that is a problem
    • I bought a manual lens over xmas and it took me a while to find the "shutter w/o lens" function in the menu settings.  So far I haven't found a way to either put that on the Q menu or marry that setting to one of the 4 custom modes.   Am I missing something? Is there a problem if I just leave that setting enabled even when the OEM auto lens is in place? tia
×
×
  • Create New...