Jump to content

Off Camera Flash Options

rogerlund
 Share

Recommended Posts

rogerlund Newbie

rogerlund

Posted
Posted

HI all. I'm shooting mostly Fuji These, days. But I still have some of my old Canon gear, including my Canon 430EX.

 

I have a family (CUZ) wedding to shoot in May, and while I own over 70 lenses, (all non fuji, I shoot manually) I normally don't shoot much flash. I'm thinking a flash setup would be a good investment, as i'm doing more portrait shots and the kids are going to be doing more events as they get older.

 

I've been considering the following:

 

For Stands, reflectors, etc.

 

Impact Multiboom Light Stand and Reflector Holder - 13' (4m) - I would like 2x, if have budget. Up for up for suggestions on a cheaper option?

Impact Umbrella Bracket with Adjustable Shoe. - up for suggestions on a cheaper option?

Spinlight 360 EXTREME Modular System for a defuser. - Looks ok, up for optiosn, prefer something sligher cheaper.

I have a Neewer Photographic Lighting Reflector Disc With Bag - Translucent, Silver, Gold, White, and Black - 43-inch / 110cm.

 

For Flashes

 

Nissin Di700A Flash Kit with Air 1 Commander for Fujifilm Cameras 


or 


a Cactus V6ii, and a lower cost non name brand flash. ( looking for options )

Roboshoot ?

 

Another question on the Cactus V6ii: does it allow you to fire both a canon and non canon flash at once in the same group? aka I could perhaps re use my 430EX as a flash in group a, with a non name brand flash? I assume I need a receiver for each flash. Other options?

 

My goal is to keep this around $400-500.

 

Link to post
Share on other sites
Guest welshkc

Guest welshkc

Posted
Posted

Check out the Strobist 101 and gear line up.  He has a lot of good tips.  If you go Cactus, be sure to get a flash that does highspeed sync.  You will want it eventually.  Your Canon 430 may be good enough since Cactus should be compatible regardless which camera is under it, but the flash has to support HSS.  

 

Strobist Gear Link

 

I recently shot a wedding as a favor to someone.  The umbrella setup that I brought never got used.  Just the Yongnuo 560 III speedlight and TX with 50-140mm and 18mm F2.  The flash had the plastic cover diffuser on it which was plenty for all shots.  Once an all around flash power was set I left it alone and let ISO move around to accommodate the variances.  Top ISO range was 6400.

Link to post
Share on other sites
rogerlund Newbie

rogerlund

Posted
  • Author
Posted

Check out the Strobist 101 and gear line up.  He has a lot of good tips.  If you go Cactus, be sure to get a flash that does highspeed sync.  You will want it eventually.  Your Canon 430 may be good enough since Cactus should be compatible regardless which camera is under it, but the flash has to support HSS.  

 

Strobist Gear Link

 

I recently shot a wedding as a favor to someone.  The umbrella setup that I brought never got used.  Just the Yongnuo 560 III speedlight and TX with 50-140mm and 18mm F2.  The flash had the plastic cover diffuser on it which was plenty for all shots.  Once an all around flash power was set I left it alone and let ISO move around to accommodate the variances.  Top ISO range was 6400.

 

So I guess the question is, do I go with a HSS system, or with the Nissin TTL system...

Link to post
Share on other sites
Guest welshkc

Guest welshkc

Posted
Posted

Most of my work with a flash is off camera so I find little need for TTL.  When you lay the flash on the ground or bounce it off something  to get "that look" then the exposure in front of the lens is not that relevant.

 

This is a link to one of my favorite car pics that I took with a single 560III laying on the ground.  Obviously, TTL would be useless.

 

31815502835_9be74faef2_k.jpg

 

 

My choice would be HSS so those bride pics in the sun can be done with good face exposure and some highlight in her eyes at F5.6.

Link to post
Share on other sites
rogerlund Newbie

rogerlund

Posted
  • Author
Posted

Most of my work with a flash is off camera so I find little need for TTL.  When you lay the flash on the ground or bounce it off something  to get "that look" then the exposure in front of the lens is not that relevant.

 

This is a link to one of my favorite car pics that I took with a single 560III laying on the ground.  Obviously, TTL would be useless.

 

31815502835_9be74faef2_k.jpg

 

 

My choice would be HSS so those bride pics in the sun can be done with good face exposure and some highlight in her eyes at F5.6.

 

Thanks for the example.

 

I'm wondering about the cactus II setup then, thoughts on just getting two matching flash like YONGNUO's  or mixing a nicer flash as primary Group A, and using the Canon 430ex in group B. I assume I wouldn't want to use the Canon with something else in group A.

Link to post
Share on other sites
Guest welshkc

Guest welshkc

Posted
Posted

The YN 560 series do not do HSS.  That is why I don't have a Cactus yet.  I'd have to upgrade my lights to use the functions, so for now I just use non-flash methods to deal with bright situations.  ND filters, reflectors etc.

 

If I decide to spend on fancy speedlights, it will be either Fuji or Canon with a Cactus setup for remote firing and HSS.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • jerryy
      Fungus

      By jerryy · Posted

      A fungus in the forest.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

      (p.s. Open Topic.)  
    • Don Barar
      LUT doesn't works on resolve

      By Don Barar · Posted

      The backslashes you are referring are just symbols denoting path.  Once you import into these LUTS into Davinci Resolve those backslashes are removed by default and you only see is the true file name which has no backslashes.  Convince yourself of this by opening the LUT folder from the Davinci Resolve Project Settings.  Do you see any backslashes in those LUT names? Of course not.  The only name you see is the one that has the underscores and the periods. These LUTS work as designed without having to change any path names.  However, they need to be set up properly through CSTs and by what is supported in Davinci Resolve.  Hence, the FLog2C film simulation LUTS cannot be used because Davinci Resolve does not support Fuji Gamut color space and the FLog2C gamut. Alternatively, Davinci Resolve does support Flog2 film simulation LUTS because the color space for FLog2 is Rec 2020 and there is an FLog2 gamut. If all you are doing is changing the path names then you are not getting the correct results.
    • PoorAlchemist
      LUT doesn't works on resolve

      By PoorAlchemist · Posted

      I found the reddit topic i refere to :  https://www.reddit.com/r/davinciresolve/comments/1pc3f1e/cant_apply_new_fujifilm_gfx_55_lut/ "Update for y'all, It's just like what @ExpBalSat said, it's because of the backslashes in the names break them. I changed the file name and it works now. "   For me it was the solution. Realy annoying if it doesn’t work for you 😕  
    • Don Barar
      LUT doesn't works on resolve

      By Don Barar · Posted

      Here is the solution to using the Eterna 55 file simulation LUTs in Davinci Resolve.   In general, do not use the FLog2C to film simulation LUTs as they are not supported by Davinci Resolve for two reasons: 1) Davinci Resolve does not support Fuji Gamut Color Space and 2) Davinci Resolve does not support FLog2C gamma.  Instead, use Flog2 which is supported by Davinci Resolve.  Here is an example.  Let's say that you want to use Classic Chrome simulation.  Do the following: Complete your color grade and use a CST to get to Rec 709. Add a node.  Use a CST to convert from Rec 709 to FLog2.  Output Color space is Rec 2020 and Outout Gamut is FLog2. Add a node.  Apply the FLog2 to Classic Chrome LUT Create a combination node from node in steps 2 and 3. Apply a Key to the combination node and adjust the Key Output Gain to get the amount of the combination node that you want applied. So that you do not have to do this over and over again, generate a LUT for the combination node.  Remember to turn off all other nodes before generating the LUT. Hope this helps others. Don  
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      Thanks for the insights. I think it's really hard to make a decision without having the two side by side! 
×
×
  • Create New...