Jump to content

Recommended Posts

I'm not sure but I think this is the first time I've used this forum to ask a question, and if I'm out of line, please know that I'm open to correction.

I'm at 77 yrs and my mental retention is much shorter now, and I apologize ahead of time if I'm in error.

I'm hoping that someone on the forum can provide some good advice about which top of line flash unit is best to use on the X-H-2 Camera. 

I've had the camera for a year now and I'm still learning and the manual is so large and somewhat difficult to use (for me anyway)

I've heard too many negatives about the Fujifilm 500? flash unit. I'm not sure if other brands can be discussed on this forum.

Any help will be much appreciated. 

Thank you, John W.

Link to post
Share on other sites

John,

The response above is an automated response by this site and it is just an advertisement, presumably to help cover the running costs. 
Regarding your question, I am not a pro so take this with a grain of salt, but I have been using Godox flashes for a few years without any issues. The Li-Ion powered ones are strong and a charge lasts long. I have the X-ProF radio remote, the V860IIF (hot-shoe) and the AD200. There are newer ones in the meantime. They are very good value for money, I think. 
Cheers, 

George

Link to post
Share on other sites

Hello George, Thank you so much for the info! I did do some research after posting my question, and I feel as you do after reading articles and reviews, and looking at the specs.

All pointers seem to lead to the the Godox Li-ion powered X-Pro as best for my X H2. Your response and reccomendation just reaffirmed my choice, and then to top it off, just this early morning while taking photos of nesting Osprey, a fellow photographer came by and I asked him what his opinion was regarding flash for my particular H-2, and he being a Canon man told me that he felt the Godox Pro would probably be my best bet.

Thank you George, and a thank you to this forum also!

John - Milford, MI 48381

 

Edited by Spidrluvr
Link to post
Share on other sites

No worries John, a pleasure. From the on-camera flashes, the ones with Li-Ion accus are the V860II, V860III, V1, V1Pro. Make sure you get the “F” versions for Fujifilm.

The 350, 685 are powered by AA batteries, avoid these. But recently, rechargeable Li-Ion accus in the size and shape of AA batterries are a thing so that might change the previous statement if someone needs a smaller or cheaper flash than the ones in the first paragraph. 

Also, if you buy the remote control, X-ProII or X3, you need the “F” versions. You can add studio flashes to this system, also portable Li-Ion ones like the AD-200, they will work with the remote no matter which version (Canon, Nikon, Sony, Fujifilm) you have, so if you also use another camera you just buy the corresponding remote and the flashes will work. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • Thank you. I will research it.
    • Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
    • How does one make sure that Fuji's image correction is turned on to correct barrel and pin-cushion distortion on a GFX 100 or GFX100S when using the GF20-35? Is it only applied to the jpegs and not to the raw files? (I was surprised to discover the barrel distortion on the GF 35-70mm lens.) I normally shoot in raw with jpeg back-up and use the raw files, which I convert either in Affinity Photo 2 when editing with that program or in Raw File Converter Ex 3.0 by Silkypix if I wish to process the image in Photoshop CS6. (Adobe DNG is also a possibility.) Thank you for the help. Trevor
×
×
  • Create New...