After Firmware 2.01 update cant take RAW pictures

[adt]

Hi everyone, 

 

I would really appreciate your help. I have received yesterday my Fuji XPRO2 and have done (with a formatted memory card, and a fully charged battery) a firmware upgrade for the body.

 

Well.... now I cant select RAW files (only FINE or NORMAL) , cant select many items of the menu (eg Film Simulation, Grain Effect, White Balance ...). I have tried it multiple times with 2 different memory cards and two different fully charged batteries. 

 

With version 2.0 the camera worked fine. Any ideas what the problem might be? Or should I return this camera?

 

Thanks for your help in advance!

[johant]

I don't own a X-Pro2, but did you try a factory reset?

[addicted2light]

Check carefully in the menus, to me it looks like you might have inadvertently selected one option that is jpg-only (art filters and the like), and that's preventing you from switching to raw.

 

Also check the ISO dial, you might have bumped it in some sensibility only available in jpg.

 

In the worst case you could do a full reset just to start from scratch.

[flysurfer]

Also check the ISO dial, you might have bumped it in some sensibility only available in jpg.

 

 

What sensitivity would that be? 

[addicted2light]

What sensitivity would that be? 

Sorry I was thinking about the xt10 and x100 series, where you are limited to jpg at 100 and over 6400 iso. As far as I know this it's not the case anymore on the xpro2

[adt]

HI everyone, 

 

Thanks for your replies. I made as suggested a factory reset and now everything works again. 

However, this was very strange...definitely no problem with iso 

 

Thanks again

[Mike G]

Don't forget software is not perfect, whose ever it is!

[Flanderspix]

I discovered a possibly related problem in my XP2 after the update. When set to save RAW  to card slot1 and JPG to card slot2 it gives the "card 2 not initialized" error. Both cards work fine in slot 1, and both work fine in "backup" save mode shooting RAW/JPG Fine. Reformatting (in camera) does not help.

 

 

[Flanderspix]

The problem with the inability to save RAW/JPG to separate cards was resolved with version 3.00 firmware update. Makes life a bit easier