Jump to content

Worse viewfinder selector (and button) in X100VI vs X100V

cnr0074
 Share

Recommended Posts

cnr0074 Newbie

cnr0074

Posted
Posted

I already own an x100V which I've shot quite a lot with, and by now I am very familiar with the feeling of its controls.
On friday I got the latest iteraction of the x100 serie, and as soon as I held it I felt the viewfinder selector and button seemed a bit looser, and in general much worse quality compared to the older one.

Can anyone confirm this? When I heard that production moved to china I was a bit skeptical despite the "china or japan is the same quality" claims but if worse quality or QC is the price to pay to satisfy deman I'll gladly keep my older camera and give up the IBIS I actually bought the IV for.
 

Link to post
Share on other sites
SimonW Contributor

SimonW

Posted
Posted

Hi Greybeard, yes, it seems a great camera. But perhaps you could go menu function button setting and try to change the ael/afl button from on (hold) to switch (toggle) and see if you can. The manual says how. If you can I must have a faulty camera. I've tried immediately after a complete reset back to factory condition.

Cheers, Simon

Link to post
Share on other sites
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      How does one make sure that Fuji's image correction is turned on to correct barrel and pin-cushion distortion on a GFX 100 or GFX100S when using the GF20-35? Is it only applied to the jpegs and not to the raw files? (I was surprised to discover the barrel distortion on the GF 35-70mm lens.) I normally shoot in raw with jpeg back-up and use the raw files, which I convert either in Affinity Photo 2 when editing with that program or in Raw File Converter Ex 3.0 by Silkypix if I wish to process the image in Photoshop CS6. (Adobe DNG is also a possibility.) Thank you for the help. Trevor
×
×
  • Create New...