Jump to content

X-S10 viewfinder stabilization in “Shooting only” mode

musimon

By musimon
in Fuji X-S10 / Fuji X-S20

 Share

Recommended Posts

musimon Newbie

musimon

Posted
Posted
Hello,
 
I have an X-S10 camera and several lens, some with OIS such as the XF 150-600mm.
 
Regardless of the lens, when I choose IS Mode “Shooting only”, I never get a stabilized image in viewfinder, even if keep the shutter button half-pressed (but resulting photos do seem correctly stabilized). If I choose IS Mode “Continuous”, I do get a stabilized image in the viewfinder.
 
This behavior does not match what is explained in the fujifilm manuals or online guides such as https://fujifilm-x.com/en-gb/learning-centre/image-stabilization-explained
 
“On the CONTINUOUS option, the OIS system is always active when the camera is on, whereas SHOOTING ONLY switches the system on when the shutter release is pressed halfway to focus. To maximise battery life, choose SHOOTING ONLY. This function also works for IBIS.”
 
Can anyone confirm me if this is an issue?
 
Thanks
Rafael
Link to post
Share on other sites
musimon Newbie

musimon

Posted
  • Author
Posted

Just found the explanation: when using “shooting only” modem, stabilization  is only activated when shutter button is half pressed when in AF-C mode. In AF-S mode, stabilization is activated only when button is full pressed.

This is actually described in the manual:

“ (…) image stabilization is performed only when the shutter button is pressed halfway (focus mode C only) or the shutter is released.”

Other fujifilm online guides do not mention this nuance.

Thanks

Rafael

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Don Barar
      LUT doesn't works on resolve

      By Don Barar · Posted

      Here is the solution to using the Eterna 55 file simulation LUTs in Davinci Resolve.   In general, do not use the FLog2C to film simulation LUTs as they are not supported by Davinci Resolve for two reasons: 1) Davinci Resolve does not support Fuji Gamut Color Space and 2) Davinci Resolve does not support FLog2C gamma.  Instead, use Flog2 which is supported by Davinci Resolve.  Here is an example.  Let's say that you want to use Classic Chrome simulation.  Do the following: Complete your color grade and use a CST to get to Rec 709. Add a node.  Use a CST to convert from Rec 709 to FLog2.  Output Color space is Rec 2020 and Outout Gamut is FLog2. Add a node.  Apply the FLog2 to Classic Chrome LUT Create a combination node from node in steps 2 and 3. Apply a Key to the combination node and adjust the Key Output Gain to get the amount of the combination node that you want applied. So that you do not have to do this over and over again, generate a LUT for the combination node.  Remember to turn off all other nodes before generating the LUT. Hope this helps others. Don  
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      Thanks for the insights. I think it's really hard to make a decision without having the two side by side! 
    • George_P
      Please save me from insanity 23mm f2 vs F1.4r

      By George_P · Posted

      I don’t have the 23 f2 but I have read several times that it is considered a little soft at close distance, compared to the 23 f1.4 lenses. These will also focus at shorter distance from the subject, esp. the new one. So that might make a difference. The new 23 f1.4 LM WR  has better resolution, esp. in regard to the 40Mpix sensors, which you don’t have on the X-T2. What practical difference that makes for the value of the pictures one makes is disputable and subjective.  f1.4 will gather more light but with a smaller DOF, which may be desirable in some situations but not so in others, depends. If you like to shoot close ups, you will probably use higher f numbers to get a bigger DOF. Same for landscapes. If you are a bokeh fan, yes the f1.4 lens are better.  The older 23 f1.4 lens that you are considering is a very good and respected lens. The f1.4 vs f2 aperture per se is perhaps not so important. The 23 f2 is very small, light and practical and a great lens for travel and landscapes. So, go figure. I am afraid I just sent you further down the road to insanity !
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      First post here but long time fuji shorter. I use the XT2 with the 23mm f2 / 35mm 1.4 / 16-80mm f4 I'm considering the 23mm f1.4 r (Non-WR) About me: - I shoot black and white only. - I like macro details to wide open landscapes and everything in-between. - I shoot mostly for art, intrigue and creativity of the image. My question - is the 23mm f1.4 going to offer me any meaningful difference over the f2 for the above scenarios Thanks and sorry for bringing it up again...
    • DavidJohn
      Unmarked government installation

      By DavidJohn · Posted

      I discovered this unmarked government installation today.  

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...