Jump to content

Hello from the world!

GiuseppeFuji

By GiuseppeFuji
in Newbie / Self Introduction

 Share

Recommended Posts

GiuseppeFuji Apprentice

GiuseppeFuji

Posted
Posted

Hi,

I am Italian, living in The Netherlands and working around the world as expact for almost 25 yeas so I define myself as citizen of the world.

I started with photography in my teenager years when I was shooting with an entry level reflex, couple of zooms and lots of film rolls.

During the university and the early carrier, I left photography aside, too busy with building a life. It took quite some years to have a camera back again in the hands and that was when I was working in Singapore but by then the digital replaced the film, so I had a sort of new start.

Of course, moving ahead in life, I dropped photography again for few years till I discovered Lomography which brought back my passion and I restarted with rolls and toy cameras.

And since, after a two there is always a three, I put the cameras and films aside again and using the mobile phone here and there shooting without thinking.

Now since few months, I have this urge to step back again in to real photography and so Santa has already put  under the tree an X-T5 with 23mm 1.4f R LM WR.

I am back.

 

Giuseppe

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • deagojonson
      Loosing almost all the settings

      By deagojonson · Posted

      Hi! I’m new here too. Losing settings might be due to the internal battery running low try keeping the main battery in or charging via USB-C. Also, backing up with Fujifilm X Acquire can help. Thanks for bringing this up!
    • deagojonson
      Webcam X issues with X-T3 - just shows logo

      By deagojonson · Posted

      Thanks for the tips! Turning on the camera before plugging in USB really helped. Zoom works fine for me too haven’t tried others yet, but good to know about Webex and Camtasia.
    • Anh Vinh Râu
      Fujifilm X-T5 is so bad

      By Anh Vinh Râu · Posted

      I bought a Fujifilm X-T5 to use for my service photography. But in fact, the quality is not as they advertise Although I use red label XF lenses for this machine, the image quality is too bad, not sharp. The AF-C system, eye - face tracking of the X-T5 is very poor, often out of focus and is my nightmare every time I go home after the photo shoot to check the image on the computer. I lost a lot of customers because of the poor image quality that Fuji X-T5 brings Will there be a firmware update as soon as possible to fix these problems? I'm considering changing to ZF because I really don't trust Fujifilm equipment
    • Jacko
      Problems downloading firmware

      By Jacko · Posted

      It seems there isn't a definitive solution to resolve "NEW FIRMWARE NOT TO BE FOUND. TURN OFF THE CAMERA."  I have 3 x prime lenses for my XE-2, and recently fell back into using it daily after a very long time. As it had been so long, I first upgraded the body to 4.11, then tried to update each of my lenses. Not one download (.DAT) file has worked on either. Due diligence was executed whilst trying to update the firmware on each lens to no avail. I'm savvy with upgrades and tried: formatting repeatedly, different computers & cards, downloading files direct to card, using different batteries, lens on, lens off, checking file names, and even balancing on my thumb whilst performing the former, but, still no joy. So, has anybody successfully updated a lens from 1.00 to 1.01 or beyond on an XE-2 running firmware version 4.11? Maybe, the answer is, the XE-2 running 4.11 firmware does not support any lens updates from 2019, but a response from google ai discounts that. I'd be grateful for for any help on the above. 🙏🏼          
    • Gustri
      use X-Webcam software on MacOS, X-T30 still not detected

      By Gustri · Posted

      I installed X-Webcam on MacOS Sequilla 15.  I've set the camera: 1. Wrench - Connection Mode - X Webcam  2. AF/MF - Face/Eye Detection Setting - Face Detection ON - EYE Auto , then i link the camera to the laptop use both a USB Type C cable and an HDMI micro cable.  The FujiFilm Cam isn't detected on Zoom app, Tella, or Loom camera options. Hw to fix this? - 
×
×
  • Create New...