Jump to content

Lens for Fuji as camcorder

stefanocps

By stefanocps
in Fuji X Lenses

 Share

Recommended Posts

stefanocps Contributor

stefanocps

Posted
Posted (edited)

Hello, i was till now searching for a camcorder for run and gun situation, i have already a XT3 with 18 55 and 55 200 but it is not so quick to use.

So after considering Sony Ax700, some Panasonic ecc..i start to think..why not to use another Fuji, with a zoom lens, so that i don't need to switch lenses?

For this i think the X S10 is the best, being small, with stabilizer and good AF (better then XT3 right)..also not so expensive

Now the choice go to the lens

There are the 2 similar 17.70 Tamron and 16 80 Fuji

Plus there the bigger ones 18 135 and 18 120 from Fuji

Now i don't know any of those..of course i need tha have good and silent AF, may be not too bulky or heavy...yes the 18 120/135 seems another range..but still i would like to compare with the other

of course..it is FOR VIDEO!

 

Thanks fot your opinion on these lenses, and also for the general idea!

Edited by stefanocps
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Michaelb5
      ISO and exposure dial’s misbehaving. Need help

      By Michaelb5 · Posted

      Hey everyone, I am new to the fujifilm system, and I just received my X100vi about 15 days ago, and yesterday I noticed that ISO and exposure dials are acting up. I spent hours watching YouTube videos and reading forms without finding any solutions. Using ChatGPT or Gemini also didn’t help. My issues are the following: If I want to set my ISO at a specific value then the camera LCD/EVF shows a totally different value. For example, I have shutter manual, aperture manual and ISO dial at 6400, the camera shows ISO at 4000, when I take pictures it will show ISO at 4000 and not 6400. When I try to choose another ISO value it will skip some of the available values that are shown on the dial. Another issue I am having is when my exposure dial is not set at specific value, then I cannot set ISO to Auto no matter what value I select on the dial. If I do select the different exposure compensation values, then I choose A for ISO, the camera will activate the front commend dial to manually change ISO values. To get in Auto ISO, the shutter speed cannot be set in auto and the ISO dial should be set at 125, when I turn the ISO wheel, it seems like the numbers are misaligned by one value, If I put the dial on A with shutter speed manual, then it will trigger the front commend dial. The other issue that I am having is when I have Aperture, shutter speed and ISO on manual, If I change the exposure dial compensation + or - , it actually changes the exposure of the picture as well as the ISO value, which as I understand, if Camera is in full manual, the exposure dial should do nothing. The last issue that I am having, if I do have ISO in manual at a set value, and adjust exposure compensation dial, it alters my ISO instead of my shutter speed or my aperture, even though ISO is in Manual and the other two dials are in Automatic. I am not really sure if all of this is by design and I am just not understanding how everything works together, but it seems really odd how everything changes. Resetting the camera settings didn’t help. 
    • FSND
      Remote Release suddenly stopped working

      By FSND · Posted

      I also have the eaxct problem with my X-T5. The remote used to work, but not anymore. I also get the light coming on on the camera back, and autofocus will happen, but no shutter release. Since I use the 2 or 10 seconds timer more I don't know if a firmware update is the cause of this negative change. I actualley only use the wired jack-remote for action release on a tripod.  Did anybody find a cause, and even more assisting, a solution?
    • mahidoes
      X-T5 always shows firmware update menu when turned on

      By mahidoes · Posted

      I have the same issue. Have you found the the solution?
    • jerryy
      landscapes with fuji x

      By jerryy · Posted

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • Rich Martin
      OVF magnification

      By Rich Martin · Posted

      On my XPro 2 the rear command dial, when pressed, can cycle through 3 different magnification levels in the OVF.  
×
×
  • Create New...