Jump to content

Recommended Posts

Dear All,

I just bought my first Fuji camera, a X-Pro2 with a 35mm f.2 attached to it. Needless to say I'm new to this forum, and this is my first question.

I will most likely be using the camera mainly with OVF. This said, I wonder if the Power Management mode setting (High Performance vs. Standard) would affect the AF speed in any way. Fuji doesn't make a distinction and says both settings provide 'Fast AF Speed'. I don't seem to notice any difference myself, but maybe the difference becomes clear in particular situations?

 

Thanks for your thoughts/feedback!

tdG. 

Link to post
Share on other sites

HPM = more fps (readout) = more AF samples = better AF (tracking) performance.

 

... without compromising the amount of shots you can take? Fuji predicts for both settings a total amount of shots of 350 on one battery charge. Only Economy mode will provide a higher amount, up to 380 shots.

This, and the fact I'm not 'feeling' any true difference in AF Speed, makes me suspicious that there would be a benefit of the High Performance setting using the OVF. 

Link to post
Share on other sites

The amount of shots per battery charge is dependent on so many parameters that it's IMO barely worth speculating about!

 

Extreme examples?

 

Put a fresh batter in your camera, set it to CH, press and hold the shutter until the battery dies... How many shots did you get? 2000 maybe!

 

Now put a fresh battery in your camera, take a shot.

 

Use the internal raw convertor to make a jpeg copy in every single film sim, with every combination of shad/tone sharp/nr setting.

 

Then go through your menus and toggle every single item off and on

 

Oh your battery just died, and you only took one shot...

 

!!!!!!!!!!!!!!!!

 

I KNOW I AM BEING A BIT SILLY

 

But real world derivatives of the above 2 examples determine your shots per charge more than any other factor...

Link to post
Share on other sites

I agree. IMHO my shooting habits affect battery life more than anything else. When I'm working, I typically keep the cameras set to EVF + Eye Sensor, and turn them off if I'm going to go more than a few minutes without using them. I can consistently get 600 shots to a charge that way with a bit of image review/focus checking.

 

Personally, I keep HPM off on my bodies. The AF seemed ever so slightly faster, but it also seemed to rack focus more. I didn't think the difference in speed was really noticeable, and the extra hunting was annoying with the EVF.

Link to post
Share on other sites

Guys, thanks for your feedback, but will you please stick with the subject!? I know there are a zillion things that affect the battery life of a digital camera, but that was not my question. I want to know if there is a difference in focusing performance (AF Speed) for single shots - not continuous/tracking - when the OVF is used and HPM or SM power management is considered. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • Anyone out there have any experience/feedback on the Laowa 55 mm tilt shift? I’d be using it on the GFX 50s ii. 
    • Hi, I'm researching a gimbal to get someone as a present & they use a Fuji XS-10. I did a quick search of previous threads on gimbals but all of them seem to either get no replies or spammed by a link to an Amazon list. I'd appreciate any comments from folks who've actually used specific gimbals with the XS-10. I'm aware that some, such as certain models from Zhiyun, DJI & FeiyuTech either don't say that they are fully compatible with the XS-10 but other sites say they do work ok but some functions don't. It's quite difficult to work out which functions work & which don't. Thanks.
    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • This was snapped during a lunch.  Total shooting time—a few seconds. We so often read that a proper "portrait" should be snapped with a longer than normal lens, a low ISO to get lots of detail, and have a soft light held up above the head, and slightly to the side. The key, in my opinion, is always carry a camera.  Have your camera available to capture candid, authentic photographs.  Available light, no posing.   This portrait used 2000 ISO, the lens wide open at f4, and 1/100 sec. to stop any movement.  I didn't even take time to compose—I just snapped.  I leave the "Face Detection" on unless I'm photographing a landscape or subject other than a person. The GFX100RF has the equivalent of a 28mm lens.  The large sensor renders fine detail even at fairly high ISO ratings.  And the drawing of the lens is just perfect in my opinion.  It was set to B & W, with slightly reduced sharpness and clarity (set in-camera).  Ideal for "portraits."  Now, for some subjects I will likely increase the sharpness and clarity to the normal setting.  The camera is new, and I'm still experimenting with it.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...