Jump to content

Recommended Posts

  Just got the XT-10 and Fuji 16-55 F2.8.  I am using Sony A7ii but have a strong interest in the Fuji system.  I like everything about it BUT the Q button I keep hitting with my right hand. Any suggestions? Also, Did I choose the the Best System for shooting weddings?  I appreciate any suggestions. Thanks

Link to post
Share on other sites

I don't shoot weddings, but I have both a Sony A7r and an X-T10.

 

Never had a problem with the Q button, but the handling of the camera improved greatly by adding an L-bracket thanks to its additional grip/handle (10$ on ebay).

 

Like I said I don't shoot weddings, but contrarily to what the Internet seems to think I was never favorably impressed with Sony high ISOs performance. Above 800/1600iso (and in long exposures) all the Sony I ever had, included the A7r, put out hundreds of hot pixels that are a pain to get rid off (with or without the noise reduction on). This if you actually use the high ISOs in low light situations, instead of in fairly brightly illuminated scenes like in many of the online tests.

 

The Fuji images instead, while a tiny tad more grainy if compared to Sony's files downscaled to 16Mp, are remarkably clean and seem to respond much better to luminance noise reduction, and to almost not need at all color noise reduction.

 

Last thing, Fuji focus peaking is bang on precise, while Sony's is always way off to be really useful.

Link to post
Share on other sites

You're welcome.

 

BTW, in my opinion (and in the way I use them) Sony cameras excel for landscape & studio, basically "tripod use", while Fuji (and to a lesser extent Olympus) are better tools for handheld shots.

 

In a practical sense, Sony replaced my medium (6x7) and large format (5x7") setups, while Fuji and a small (especially in terms of lenses' size) Olympus have replaced my 4.5x6 medium format and 35mm film setups. As they say horses for courses.

Link to post
Share on other sites

Guest thiswayup

If the q button is really a problem, you could trying adding some protection using Sugru. Its most common use with a camera is adding grip, but there's no reason you can't use it to shield the Q button from whatever angle you are hitting it from:

 

https://sugru.com/blog/6-sugru-ideas-for-photographers

 

a2l's advice sounds good to me; I add the type of grip I think he's talking about to every camera when possible now. They handle well and the fast tripod attachement using arca is nice:

 

http://www.amazon.com/Fotga-External-Bracket-Fujifilm-Camera/dp/B013UH24PI

Edited by thiswayup
Link to post
Share on other sites

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Hy there When Im using the fan001 on the XH2s and I flip the LCD Screen vertically by 180 degrees then the image flips vertically, what is good but it also flips horizontally. The clean feed on HDMI is not flipping horizontally but its also flipping if the HDMI output info display is on. When I unmount the fan then the image flips only vertically. My firmware is updated to the latest version. Any ideas if there is a fix for that?
    • In reply to the original question, it all depends on what you mean by infrared.  If you mean "see thermal information", then I agree with the comments here.  However, if you mean near-infrared, the X-T4, or basically any digital camera can be modified to "see" it.  Check out Lifepixel.com and Kolarivision.com for more info. As regards lenses, I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • No - I don’t think so - it means you can take pictures if you remove the lens completely - but I’m not sure that is a problem
    • I bought a manual lens over xmas and it took me a while to find the "shutter w/o lens" function in the menu settings.  So far I haven't found a way to either put that on the Q menu or marry that setting to one of the 4 custom modes.   Am I missing something? Is there a problem if I just leave that setting enabled even when the OEM auto lens is in place? tia
×
×
  • Create New...