Jump to content

New To Fuji XT-10 For Weddings


rollsman4

Recommended Posts

  Just got the XT-10 and Fuji 16-55 F2.8.  I am using Sony A7ii but have a strong interest in the Fuji system.  I like everything about it BUT the Q button I keep hitting with my right hand. Any suggestions? Also, Did I choose the the Best System for shooting weddings?  I appreciate any suggestions. Thanks

Link to post
Share on other sites

I don't shoot weddings, but I have both a Sony A7r and an X-T10.

 

Never had a problem with the Q button, but the handling of the camera improved greatly by adding an L-bracket thanks to its additional grip/handle (10$ on ebay).

 

Like I said I don't shoot weddings, but contrarily to what the Internet seems to think I was never favorably impressed with Sony high ISOs performance. Above 800/1600iso (and in long exposures) all the Sony I ever had, included the A7r, put out hundreds of hot pixels that are a pain to get rid off (with or without the noise reduction on). This if you actually use the high ISOs in low light situations, instead of in fairly brightly illuminated scenes like in many of the online tests.

 

The Fuji images instead, while a tiny tad more grainy if compared to Sony's files downscaled to 16Mp, are remarkably clean and seem to respond much better to luminance noise reduction, and to almost not need at all color noise reduction.

 

Last thing, Fuji focus peaking is bang on precise, while Sony's is always way off to be really useful.

Link to post
Share on other sites

You're welcome.

 

BTW, in my opinion (and in the way I use them) Sony cameras excel for landscape & studio, basically "tripod use", while Fuji (and to a lesser extent Olympus) are better tools for handheld shots.

 

In a practical sense, Sony replaced my medium (6x7) and large format (5x7") setups, while Fuji and a small (especially in terms of lenses' size) Olympus have replaced my 4.5x6 medium format and 35mm film setups. As they say horses for courses.

Link to post
Share on other sites

Guest thiswayup

If the q button is really a problem, you could trying adding some protection using Sugru. Its most common use with a camera is adding grip, but there's no reason you can't use it to shield the Q button from whatever angle you are hitting it from:

 

https://sugru.com/blog/6-sugru-ideas-for-photographers

 

a2l's advice sounds good to me; I add the type of grip I think he's talking about to every camera when possible now. They handle well and the fast tripod attachement using arca is nice:

 

http://www.amazon.com/Fotga-External-Bracket-Fujifilm-Camera/dp/B013UH24PI

Edited by thiswayup
Link to post
Share on other sites

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • FYI Update - I just learned that the Zoom F6 & F3 recorder/mixers also synch to the UltraSynch Blue over bluetooth. I am planning to record 32bit float on the F6 and it will have frame accurate matching time-code with my two-XH2S' and one XH2.
    • Hopefully these will help some. For quite a while now Apple has put stuff into their operating system so that you cannot yourself open the connected camera’s card and see the images, you have to use their or third party software to do that.
    • Thanks for the instructions:  I was doing up to 3 successfully but can't wait to get home and try  4 and 5 and report back. Cheers, John
    • Okay, just for completeness sake: 1.     The camera’s menu connection setting is USB CARD READER. 2.    The computer is turned on, booted and nicely operational. 3..    With the camera turned off, connect the camera to the computer using a known-to-be-good USB C data plus power cable (a data only cable should work as well, a power only cable will not work). 3.   The camera’s charging light may turn on. Turn the camera on. The back screen probably will show the USB symbol as well as the USB letters. 4.    Start up the Image Capture app and see if the camera’s name appears in the devices list. 5.    In the Apple menu, select ‘About This Mac’, click on the ‘More Info…’ button, and on the right hand side of the window that opens, at its bottom is a button called ‘System Report…’, click on it. A new window should open, the left hand side has collapsible dropdown listings, the first is called “Hardware’, within it is the USB listing, select that. The right side pane should give you listings of all the USB devices connected at that moment, one of them should say something like USB PTP Camera. Does either 4. or 5. work?
    • Thanks, Yes I knew about the USB issue in newer Macs and macOS but that is why I tested it with High Sierra as well. Also the fact that every other camera easily connects via USB direct with the camera - definitely points out the fact that it is a FUJI specific problem.  Furthermore - I remember being able to direct connect early last year. I rarely take the Cards OUT of the camera  these days. The weird thing is I can connect my iPhone 15 via USB-C to 100s and pull files directly - puzzling. Problem is FUJI rarely listens to anyone.    
×
×
  • Create New...