Jump to content

Card error camera freezes

Rufo

By Rufo
in Fuji X-T4

 Share

Recommended Posts

Rufo Newbie

Rufo

Posted
Posted (edited)

Hello everyone,

I have a Fuji XT4 and yesterday I had the first issue since I got the camera. I was filming 4k with two Lexar Professional 128gb 1667x cards in the slots. 

I had the camera on but I was not filming and suddenly I read: Card 2 error. Then the camera stopped responding, didn't turn on nor off. I was using official fuji battery (which was almost fully drained) and I put another battery this time a Patona but the camera did not turn on. Then I changed both cards with new ones (same Lexars) and the camera started to work again. I noticed that I forgot to format the card in the 2nd slot before using, so it had a bit of old footage on. I hope the footage is not corrupted. I did not update the firmware yet, so I still have the 1.40 version.

Did anyone have the same issue and know how to avoid in the future? I really do not want this to happen again while working.  

Thanks a lot.

 

Edited by Rufo
Link to post
Share on other sites
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Giampaolo Masserano
      Looking for Full Frame lenses to adapt to GFX

      By Giampaolo Masserano · Posted

      I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...