Jump to content

Card error camera freezes

Rufo

By Rufo
in Fuji X-T4

 Share

Recommended Posts

Rufo Newbie

Rufo

Posted
Posted (edited)

Hello everyone,

I have a Fuji XT4 and yesterday I had the first issue since I got the camera. I was filming 4k with two Lexar Professional 128gb 1667x cards in the slots. 

I had the camera on but I was not filming and suddenly I read: Card 2 error. Then the camera stopped responding, didn't turn on nor off. I was using official fuji battery (which was almost fully drained) and I put another battery this time a Patona but the camera did not turn on. Then I changed both cards with new ones (same Lexars) and the camera started to work again. I noticed that I forgot to format the card in the 2nd slot before using, so it had a bit of old footage on. I hope the footage is not corrupted. I did not update the firmware yet, so I still have the 1.40 version.

Did anyone have the same issue and know how to avoid in the future? I really do not want this to happen again while working.  

Thanks a lot.

 

Edited by Rufo
Link to post
Share on other sites
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Don Barar
      F-Log in DaVinci Resolve with MacBook Pro M1 Max

      By Don Barar · Posted

      HI Rufo, I have changed procedures.  I now use the colors space transform (CST) as my first node.  The CST is set up as follows: - Apply the CST effect to the first node. - Color Space is Rec 2020 - Input gamma is FLog - Output color space is Rec 709 - Output gamma is Gamma 2.4 All other nodes to grade the clip proceed the node that contains the color space transform. Hope this helps. Don
    • jerryy
      Trains (open thread)

      By jerryy · Posted

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

      Ohio River, Kentucky - Indiana, USA Ohio River, indiana - Kentucky, USA
    • Astigmatism
      Image Stabilisation

      By Astigmatism · Posted

      Interesting, and a bit subtle. I also think it'd be better to activate on a half press. But there seems to be good reasoning behind a number of other choices, so I wonder if there's a good reason behind this one and we're just not seeing it. To some degree IS goes on and off like AF does, but this is an exception, isn't it?
    • Heccie Thump
      Image Stabilisation

      By Heccie Thump · Posted

      I couldn't find my manual so downloaded a PDF copy and did some searching.  From p146 of the manual, regarding Shooting Only stabilisation: "Image stabilization enabled only when the shutter button is pressed halfway (focus mode C) or the shutter is released." So it appears that the camera is 'working as intended' and that in AF-S the stabilisation mechanism kicks in only as you release the shutter. I think I would prefer it to activate on a half press, like it does in AF-C.
    • jerryy
      Fuji Apps hijack exposure reading

      By jerryy · Posted

      Sometime a short break can help to phrase things so that they do not sound annoying, Well that is the hope anyway, so here goes. Having that meter would be nice as well as having the histogram. But having them or not is a minor consideration in terms of what you are wanting to do because the app does not work with intervalometers. The only way you can get a time lapse sequence using the app is to manually click the shutter button, wait then click it again and so on. Even if the meter were there, you would need extremely fast reflexes to see and react to a lighting change by changing the settings and then going back to clicking the shutter button. Doing that for hours would be a feat indeed. The equipment you mention does this by analyzing several past images and predicting what settings to apply to the next incoming image. Right now the app has the live view which will tell you if an area is over or under exposed, but as far as what you are wanting to do without being able to connect the app to an intervalometer, well …
×
×
  • Create New...