Jump to content

X-Pro2 Hands on


Recommended Posts

Hi all,

 

i was lucky to get my hands on an X-Pro2 today at a special Fuji Event in a Camera Store in Vienna and i wanted to share my impressions so far:

AF-Stick works really nice. AF seems to be improved. I tried it with the 35mm 1.4, which is supposed to be not he quickest lens and it focused immediately, no hunting, even in the dark corners of the room. This was the biggest surprise for me. The ISO Dial, which was the second thing i was curious about works quite well. For me better than on my X-T1 as you can turn it with your right Hand and i found it easier to pull it than to press the button on the X-T1.

Grip felt nice, a bit less grip than the X-T1 one, bit ok (big hands)

The viewfinder is as known smaller than the X-T1, this would be my biggest concern as i love the viewfinder of the X-T!.

i didn't have an SD Card with me, so i could only check the quality on the back screen. did 6400 RAW and could hardly find any grain.

I wanted to wait for the X-T2 but now i'm not sure :-)

For me its Bigger Viewfinder+Tiltable Screen vs  Af Stick, Dual SD, left Hand EVF (and better Quality, faster AF over X-T1)

 

They also had the 100-400 lens there. It'S really big. I wouldn't want to use it on this nice compact system.

 

cheers, Tom

 

 

Link to post
Share on other sites

  • 3 weeks later...

I also played with it a bit this weekend and I agree with your points. 

The joystick is really really a big improvement. 

 

I was also surprise at the relative lightness of the camera, given the large size. Maybe we use too many super compact bodies with lots of stuff crammed in... 

Still not too sure how comfortable this body will be with zooms though: will try it with the 16-55 f2.8 later this week.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • The Tentacle Sync Timecode tool is the one I tried. I couldn't get it to work. But that is probably my fault, not the software. I seemed to get a file, but I couldn't turn it into anything meaningful. 
    • I am glad to read you are able to get this up and running. Pretty much as long as you connect the camera and turn it on and wait a few moments for the computer to register the connection, you can then use Image Capture (which actually is a very decent program with a lot of options for transferring images from cameras to the computer) or Lightroom or other programs to move the images to your library. There are some drawbacks; connecting to the computer while it is in sleep mode will waste your time, the connection will not get recognized— you will have to unplug the camera, wake the computer and start over. Trying to connect while the screen saver is running may work, it may not, often not. If the computer goes into screen saver mode while the camera is connected and sitting idle, it usually stays connected when coming back out of screen saver, but if the computer mputer goes into sleep mode, the connection gets dropped and you have to unplug it and start over. I suggested having the camera turned off while connecting, this is to lower the possibility of static electricity discharges frying either the camera or the computer or both. A lot of times you can connect while the camera is turned on, but not always, sometimes you have to unplug, turn it off, reconnect and turn it back on. A lot of this comes from Apple’s approaches towards keeping USB devices from hijacking your computer, some is just hubris and some is from the vagaries of chance. p.s. Your laptop should be able to connect to the camera.
    • Hi Chas, I am just fallen into the rabbit hole of investigating how to upgrade my X-T4's video sound... Loving the idea of time code sync, I am now quite concerned that the X-T4 doesn't support it, although I have already seen different statements on the net, like here:  https://youtu.be/xja27RmvbhE?si=hIch3Tu_MH_pWSBH&t=571 I have to admit, this guy's "explanation" gets quite confusing in his further discourse ...:) BUT, as you wrote that you use Tentacle Sync for Windows!, did you also try with their windows-only software "Time Code Tool" which you find here?: https://tentaclesync.com/timecode-tool   Would love to here if you found a workaround with the XT4 Best, Simon
    • It occurred sometime when I focus. It is not silent 
    • This is the video for the focusing sound. Anyone can help?🙏🏻🙏🏻🙏🏻thanks a lot IMG_3226.mov
×
×
  • Create New...