Jump to content

X-Pro1 firware 3.82 issues.

fujiinky
 Share

Recommended Posts

fujiinky Newbie

fujiinky

Posted
Posted

Hi All,

I've just updated my X-Pro1 firmware from 3.80 to 3.82 and now changes in DISP. CUSTOMS SETTING are only seen in LCD and not EVF or OVF ie lots of the options are no longer available.

I've emailed Fuji but had no response so far. In fairness that may be because our local branch is located in a Covid lock down area.

I'm hoping that Fuji will fix this issue. In the mean time does anyone know if it's possible to revert back to 3.80? It's not something I want to experiment with and risk making the situation worse.

 

Cheers,

David

 

Link to post
Share on other sites
  • 4 months later...
Adam Woodhouse Proficient

Adam Woodhouse

Posted
Posted

Sorry.  Very late to this thread but I'm running 3.81 on my X-Pro1 and I can use the EVF and I do see the changes I make to custom settings of film rendition.  Such as change to B&W.  What I see on the rear LCD is the same as the EVF.  If I change Whites/Blacks to the extreme I can see the change on the EVF.

I didn't realize there was a 3.82 and based off this I think I will not do the update.  I don't think it would cause me much trouble but can certainly see it being frustrating since shooting in B&W while doing manual focus (which is what I mostly do on my Pro1 due to vintage glass on it).

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Giampaolo Masserano
      Looking for Full Frame lenses to adapt to GFX

      By Giampaolo Masserano · Posted

      I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...