X100V - S.S. (Program Shift) not working in OVF, only EVF/LCD

[John Nasvhille]

Hi there! 

On my X100V (Firmware V2.00) - using the OVF mainly - I noticed 2 differences between OVF vs. EVF/LCD: 

• First, when setting the front command dial to SS (Program Shift) - it doesn't shift the SS/Aperture combination in OVF. It does correctly in EVF/LCD. 
• Second, when using face recognition, it doesn't do so in OVF when AF is set to 'Zone' (maybe others too - but that's how I use it the most), but again it does correctly in EVF/LCD. 

Any tips/suggestions welcome! 

Many thanks, 

L. 

[flamidey]

On my X100V, if I set the front dial to Program Shift, it works even in OVF mode. You need to select the full auto aperture mode (lens aperture set to A, then choose F from the front dial, move it all the way to the right).

Face Detection is not compatible with the OVF to the best of my knowledge.

Edited March 28, 2021 by flamidey

[John Nasvhille]

Thanks already! 

Just to be sure; what do you mean with choosing F from front dial? I've 'S.S.' setup as front dial setting (picture here), but not al lot happens when moving 😄 

[flamidey]

On 3/31/2021 at 6:35 PM, John Nasvhille said:

Thanks already! 

Just to be sure; what do you mean with choosing F from front dial? I've 'S.S.' setup as front dial setting (picture here), but not al lot happens when moving 😄 

Does the P mode appear in the lower left ?