Search the Community
Showing results for tags 'exposure issues'.
I recently purchased a new Fuji X100F. It seemed to be working fine with no exposure issues up until one month ago. When I hold up the camera to shoot, the LCD shows a scene perfectly exposed. When I press the shutter down halfway the LCD is sometimes 1-3 stops either underexposed or overexposed, not even close. I have had to use exposure compensation in order to get a properly exposed picture. I know the camera very well and have read the manual several times to look for a clue as to a setting that may be out of whack. I have tried all the different exposure modes. I know these cameras have had exposure issues in the past. Any ideas? I tried resetting all the settings. Should I look for a factory firmware update? Thanks!!! Matt
Hello please can you help! I am shooting in Manual with Auto Iso. In the main with the fastest aperture and manual shutter speed. In low light I want to use the Exposure compensation dial and sometimes this doesn't seem to work on the C setting, even with pushing the front wheel to toggle to the option to use it.. The exposure isn't changing and in general all my pics are coming out a bit dark. It seems that somehow within the camera the exposure is set too low. What I'm seeing through the EVF isn't the same as the capture I'm seeing on the LCD. I'm new to the Fuji system so would really appreciate help.
Hi everyone, This is an issue that I need to understand because the price of the repair is almost the price of the Xpro-2. So I'll repair it myself. The issue result : Black pictures with no visual information in post prod (exposure max with raw files etc.) When this happens ? : in conditions of high luminosity with mechanical shutter What are the settings when this happens ? : -Exposure mesure modes- Every ones (spot, multi etc.) -Exposure compensation- Every ones (+-0, +1, -1 etc.) -Aperture modes- wide apertures but sometimes at small apertures (even with High ISO or ISO auto) -Shutter type- mechanical only (and of course M+E when it switch automaticaly to M mode) -Shutter speed- high values from 1/8000 to 1/1000 but sometimes even 1/500 (in some situations it works till 1/1000 and it works in every situation for 1/250 and slower) the A mode sets directly high values in high luminosity. -ISO mode- Every mode and value (even H or L) 5. What did I do to verify if I can fix it ? : reset, format SD cards, update firmware, sensor cleaning, defibillation etc. 6. My question is : is it a shutter issue AND why this works sometimes at 1/500 and even sometimes at 1/1000? . Maybe the shutter is ok but the transmission is not ok between the sensor, the motherboard and the shutter. So the problem may be the sensor or the motherboard. The sychronisation between the sensor and the shutter may be not the same. Indication : the sound speed of the shutter is the same at 1/125 and faster. I've read every post talking about shutter and expostition issues and decided to ask about this special problem. So I hope that someone can help me And help others in the same case. Thanks !
HI Pro's, I very recently bought a fujifilm xt-3. I'm very new this system i been in my learning stage. Currently I'm facing a issue i am not able to change the exposure setting in video mode. In video mode it's default exposure is in -2. I'm not able to change ISO, Aperture anything in video mode. All the SS, F,ISO are in Blue. My shooting setting are - 4k-23.98 HDMI Long GOP. All top Dials are in Auto. I tried change by changing the top dials but its still not working. Please help me in this issue.