Jump to content

Auto shutterspeed doesn't goes faster than 1/1000sc

Hermelin
 Share

Recommended Posts

Hermelin Proficient

Hermelin

Posted
Posted

Max shutterspeed on the x100f is 1/4000 sec but if I shot iso 200 on a bright day with aperture f/2 and AUTO shutterspeed, it only goes to 1/1000 and the image gets overexposed when it should go higher to get a correct expousure. Why does it stop at 1/1000. I mean I can use the built in ND filer, sure but I shouldn't have to. The other solution is to dial in correct shutter speed manually but I just want to shot with LOW ISO and lets the camera decide shutterspeed for correct expousre it self.

Link to post
Share on other sites
monoid Rookie

monoid

Posted
Posted (edited)

Speeds faster than 1/1000 is not supported at F2 (and AFAIR 1/2000 at F2.2) in X100* lens for mechanical reasons (so, cannot be fixed by firmware, sorry).  And this is exactly the reason why ND filter was introduced.

Edited by monoid
Link to post
Share on other sites
Hermelin Proficient

Hermelin

Posted
  • Author
Posted (edited)
4 hours ago, monoid said:

Speeds faster than 1/1000 is not supported at F2 (and AFAIR 1/2000 at F2.2) in X100* lens for mechanical reasons (so, cannot be fixed by firmware, sorry).  And this is exactly the reason why ND filter was introduced.

Hmm I didn't know that. Well then it's a not a benifit with the ND filter against for example my old X-T2 that can shot up to 1/8000sec @ f/2 (I believe).

Edited by Hermelin
Link to post
Share on other sites
monoid Rookie

monoid

Posted
Posted

Well, X-T2 cannot sync with flash at 1/8000s or even 1/1000s, while X100 can sync at 1/1000s.

You may use electronic shutter that doesn't depend on F-stop value (but it doesn't work well with flash or moving subjects).

Link to post
Share on other sites
  • 7 months later...
Raimo Launonen Newbie

Raimo Launonen

Posted
Posted

Hi,

For f/2 1/4000 try shooting mode M

I made some tests with my XF10 which might have some small parts of the software inherited from the big brothers. 🐵

The flash sync when the mechanical or mechanical shutter + electronic shutter modes are on,  works about this way (flash does not work with plain electronic shutter):

Shooting modes A and S:

f/2.8 1/1000,    f/3.2 1/1250,    f/4 1/2000,   f/7.1  1/2500,   f/8  1/4000

Surprisingly in shooting mode M the flash sync works with all apertures 1/4000 also full open f/2.8 !

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • jakabasej8
      Fujixt4 icon unknown lower left corner

      By jakabasej8 · Posted

      agreed on the upload but based on the location and number it sounds exactly like the storage slot 1 status icon
    • thelostkiwi
      XS10 and manual lenses

      By thelostkiwi · Posted

      All three of my bodies (X-E2, X-T4, GFX100S II) have shoot without lenses enabled and they have all had it set since I bought them.  No harm in it at all. Just remember to set the focal length when you fit a manual lens with no electronics otherwise the IBIS (if you have it) goes nuts. I regularly use vintage film lenses from Minolta, Zeiss, Mamiya, Rollei and others on my X mounts along with more modern manual focus stuff from TTArtisans. I also use Nikon AF-S lenses with a Fringer so the world is your oyster! Vintage lenses can be an absolute bargain too - For example the Zeiss 135 f/35 in M42 is as cheap as chips and very sharp as is the excellent Minolta 35-70 Macro (which is also rebadged Leica). 
    • Neil Rosenberg
      Infrared Photography on X-E2 665nm

      By Neil Rosenberg · Posted

      I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Tschortschli
      Screen is flipped with fan001

      By Tschortschli · Posted

      Hy there When Im using the fan001 on the XH2s and I flip the LCD Screen vertically by 180 degrees then the image flips vertically, what is good but it also flips horizontally. The clean feed on HDMI is not flipping horizontally but its also flipping if the HDMI output info display is on. When I unmount the fan then the image flips only vertically. My firmware is updated to the latest version. Any ideas if there is a fix for that?
    • Neil Rosenberg
      Infrared

      By Neil Rosenberg · Posted

      In reply to the original question, it all depends on what you mean by infrared.  If you mean "see thermal information", then I agree with the comments here.  However, if you mean near-infrared, the X-T4, or basically any digital camera can be modified to "see" it.  Check out Lifepixel.com and Kolarivision.com for more info. As regards lenses, I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
×
×
  • Create New...