Jump to content

Expensive mistake?


Recommended Posts

Today I purchased an open box copy of the GF 120mm f/4 lens from an authorized Fuji dealer (I checked on the Fuji website) on eBay.  The purchase price of the lens was $2095.  The price was so low because there is a small hair behind the rear element of the lens.  Since it is an open box item from an authorized dealer, it will have the full Fuji warranty according to the seller.  The seller claimed that the presence of the hair would should not affect image quality.  I may have made a very expensive mistake in buying this lens.  I have a few questions that I am hoping forum members can answer:

 

1)  How likely is it that the debris will not affect image quality?

 

2)  The seller stated that since it is a weather sealed lens, the debris was probably introduced during manufacture and may be covered under warranty.  How likely is this?

 

3)  If it is not covered under warranty, has anyone had experience having a Fuji lens cleaned and if so, how much Fuji charges for cleaning a lens?

 

If the debris doesn't affect image quality, I may just let it be if it is unlikely that Fuji would clean the lens under warranty and it would cost more than a couple of hundred dollars to get it cleaned.  

 

Thanks for any feedback/advice forum members can offer.

 

 

 

 

Link to post
Share on other sites

1) very

2) also very likely but that is not of your concern you should return the lens if it makes you uncomfortable, you have your warranty anyway

3) I have has lenses with "unidentified staying objects “ inside and exchanged them immediately in the shop which is what has happened to this lens in all probability.

Link to post
Share on other sites

I think you will enjoy this amazing article:

 

https://wordpress.lensrentals.com/blog/2015/06/i-dont-know-why-it-swallowed-a-fly-weather-sealed-lens-with-a-fly-inside/

 

 

In a nutshell:

 

The takeaway message, though, is in the picture you can’t see here. We took dozens of images with the lens before taking the fly out. We shot stopped down, we shot at all parts of the zoom range. We focused close, we focused far. And in no image could we find the slightest hint that there was a fly in the lens. And you guys worry about a dust particle or two!

Link to post
Share on other sites

milandro and neal3k,

 

Thank you so much for your responses. I feel much better! neal3k, the article was great! My take away from it is that barring a focus issue that would require recalibration of the lens by a technician, I will leave well enough alone and go out and enjoy the lens when it arrives the day after tomorrow. Six hundred dollars saved vs. one little hair? I can definitely live with that:-)

Link to post
Share on other sites

Reporting back.  The lens arrived today.  The hair is so tiny I can barely see it.  I had a chance to take a few pictures this evening just to check things out.  As everyone here predicted there is no apparent affect on the image quality.  Looking at the pictures in Lightroom though, made me tear up.  I am overwhelmed with gratitude for the opportunity to have and use this camera and the lenses I have for it.  I'm not a professional photographer, but even someone at my skill level can appreciate how truly wonderful this camera and the lenses (63mm, 32-64mm and 120mm) are.  Thank you again everyone for your responses to my original post.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • The Tentacle Sync Timecode tool is the one I tried. I couldn't get it to work. But that is probably my fault, not the software. I seemed to get a file, but I couldn't turn it into anything meaningful. 
    • I am glad to read you are able to get this up and running. Pretty much as long as you connect the camera and turn it on and wait a few moments for the computer to register the connection, you can then use Image Capture (which actually is a very decent program with a lot of options for transferring images from cameras to the computer) or Lightroom or other programs to move the images to your library. There are some drawbacks; connecting to the computer while it is in sleep mode will waste your time, the connection will not get recognized— you will have to unplug the camera, wake the computer and start over. Trying to connect while the screen saver is running may work, it may not, often not. If the computer goes into screen saver mode while the camera is connected and sitting idle, it usually stays connected when coming back out of screen saver, but if the computer mputer goes into sleep mode, the connection gets dropped and you have to unplug it and start over. I suggested having the camera turned off while connecting, this is to lower the possibility of static electricity discharges frying either the camera or the computer or both. A lot of times you can connect while the camera is turned on, but not always, sometimes you have to unplug, turn it off, reconnect and turn it back on. A lot of this comes from Apple’s approaches towards keeping USB devices from hijacking your computer, some is just hubris and some is from the vagaries of chance. p.s. Your laptop should be able to connect to the camera.
    • Hi Chas, I am just fallen into the rabbit hole of investigating how to upgrade my X-T4's video sound... Loving the idea of time code sync, I am now quite concerned that the X-T4 doesn't support it, although I have already seen different statements on the net, like here:  https://youtu.be/xja27RmvbhE?si=hIch3Tu_MH_pWSBH&t=571 I have to admit, this guy's "explanation" gets quite confusing in his further discourse ...:) BUT, as you wrote that you use Tentacle Sync for Windows!, did you also try with their windows-only software "Time Code Tool" which you find here?: https://tentaclesync.com/timecode-tool   Would love to here if you found a workaround with the XT4 Best, Simon
    • It occurred sometime when I focus. It is not silent 
    • This is the video for the focusing sound. Anyone can help?🙏🏻🙏🏻🙏🏻thanks a lot IMG_3226.mov
×
×
  • Create New...