Jump to content

Recommended Posts

Good day,

I was getting a few pictures, outside temp. 8 Celcius.

 

Lens Fuji 18-55

Shooting with "S" mode front of camera

Iso "A"      Shutter speed "A",

White Balance "AUTO" R 0 B 0.

 

All of a sudden the white balance read R 9 B 0, then

all new photos taken were very reddish  like sepia.

 

Did I touch something?

Thank you and best regards.

Ray

 

 

Link to post
Share on other sites

When I first had my XT2 this happened to me - went to re set the camera but no fix.   But then looked deeper and found the problem in the "Colour Balance" settings the radar view showed the selection spot off to the right - great. Well so I thought same thing happened later but this time I went to the Q button and selected White Balance and made  my normal selection of Auto.   The problem has not returned.  I thinks their is a minor software/firmwear issue.

Link to post
Share on other sites

Sadly my brand new ( under 100 clicks) iso gets stuck turn the dail no change and any photos made dont go to the card. Only way is to remove the battery for a min just a quick remove and refit does not sort the issue. Now waiting on a secondhand xe2 so i cam send it in.

 

Sent from my SM-G935F using Tapatalk

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • I never knew the X70 existed! Looks interesting.
    • Equipment: Fujiflim X-M5 (firmware V 1.10). iPhone 15 pro (26.1) I am unable to properly connect my Fujifilm X-M5 to XApp on my iPhone 15 Pro. This setup previously worked without issues, but now the app only supports a basic remote shutter and no longer allows Get or Take mode, which are required for remote parameter control and shooting. I have repeatedly Initialized “FUJIFILM XApp”, re-paired the camera, reset wireless settings, and confirmed the camera is not in airplane mode, with both devices placed next to each other. None of these steps resolved the issue. Also, I am unable to update the camera firmware, as the process always fails with a “connection failed” message. I need clarification on whether this is a known firmware or compatibility issue and what the actual solution is.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • Last day of autumn 2025. Autumn is gradual. Summer field crops slowly ripening. Cool, longer nights turn into morning fogs. Color (colour) touches here and there taking the place of flowers now resting until Spring. Then, after that slow introduction, Fall is everywhere. Winter is brash, Winter is not at all subtle. Freezing cold days and colder nights. The Sun struggles to get above the horizon. Bare fields, iced over streams and woe (‘Woe!! I say!’) to trees or shrubs holding onto leaves.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

        But there is sledding, skiing and hot chocolate for those that like those things 😀.
    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

      Winter is coming.
    • For some reason, the EV dial setting does not correlate to the EV setting displayed in the viewfinder.  My XT2 used to have parity between settings such that when the dial was at "0", the viewfinder also showed "0".  Has anybody else noticed this?  I've tried a reset of the s/w but no luck.  
×
×
  • Create New...