Jump to content

Video mode - M mode how to change exposure

crewlick

By crewlick
in Fuji X-S10 / Fuji X-S20

 Share

Recommended Posts

crewlick Newbie

crewlick

Posted
Posted (edited)

Hi everyone 👋 

On my XS-20 I'm trying to record video on manual mode as I want to have control over shutter speed and aperture. I have my ISO set to automatic but I can't figure out how can I change the exposure and set it to what I want and let auto ISO adjust to it.

 

For now the only way for me to change exposure is to change manually one of the "golden trio" settings but I want that auto ISO to be the one doing it. But for that I need my exposure to be changeable somehow but can't figure out how.

Is that even doable?

 

Thanks a mil for any advice

 

PROBLEM SOLVED 

 

sorry guys I just figured it out 😅 all I had to do is to assign one of my other knobs to change the expouse and that was it.

Edited by crewlick
Problem fixed
Link to post
Share on other sites
  • 5 months later...
Olegon Rookie

Olegon

Posted
Posted (edited)

It's interesting to me - When I want to shoot video in M mode,  I set ISO (for example 500) and start video. But ISO switch itself to A ISO and  set to 1000 or other values. What's  going on?

Solved:

In video mode M, the settings are determined by the Video mode configuration.

Edited by Olegon
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • jerryy
      Chilly

      By jerryy · Posted

      (Open Thread) Not a winter landscape, but still cold.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • jakabasej8
      Fujixt4 icon unknown lower left corner

      By jakabasej8 · Posted

      agreed on the upload but based on the location and number it sounds exactly like the storage slot 1 status icon
    • thelostkiwi
      XS10 and manual lenses

      By thelostkiwi · Posted

      All three of my bodies (X-E2, X-T4, GFX100S II) have shoot without lenses enabled and they have all had it set since I bought them.  No harm in it at all. Just remember to set the focal length when you fit a manual lens with no electronics otherwise the IBIS (if you have it) goes nuts. I regularly use vintage film lenses from Minolta, Zeiss, Mamiya, Rollei and others on my X mounts along with more modern manual focus stuff from TTArtisans. I also use Nikon AF-S lenses with a Fringer so the world is your oyster! Vintage lenses can be an absolute bargain too - For example the Zeiss 135 f/35 in M42 is as cheap as chips and very sharp as is the excellent Minolta 35-70 Macro (which is also rebadged Leica). 
    • Neil Rosenberg
      Infrared Photography on X-E2 665nm

      By Neil Rosenberg · Posted

      I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Tschortschli
      Screen is flipped with fan001

      By Tschortschli · Posted

      Hy there When Im using the fan001 on the XH2s and I flip the LCD Screen vertically by 180 degrees then the image flips vertically, what is good but it also flips horizontally. The clean feed on HDMI is not flipping horizontally but its also flipping if the HDMI output info display is on. When I unmount the fan then the image flips only vertically. My firmware is updated to the latest version. Any ideas if there is a fix for that?
×
×
  • Create New...