Jump to content

Zhongyi Mitakon 20mm F2 4.5X Super Macro Lens… also for Fujifilm X Mount


milandro

Recommended Posts

Someone at Zhongyi has knowledge of the old photographic techniques and creative marketing ideas and contrabands them as new products.

 

This lens, which looks so strange to some (but not quite so if you look closely) , is most probably simply a repurposed C-Mount lens for a CCTV camera which has been quite simply inverted and they put a ring for different cameras on it, where normally you would have the front lens.

 

Of course it gives a great reproduction ratio, it is an inverted wideangle (!) and, as to be expected under these conditions, you won’t be able to focus infinity!

 

New lens? Not quite!

 

Just good old photography ( for those of us whom are old enough to remember it! )

 

With a little of ingenuity, you can do the same. Look up (inverting wideangle for macrophotography). There are blogs, such as this showing you the whole process and I am not going to repost here thei pictures. http://vkphotoblog.blogspot.nl/2013/08/reverse-lens-macro-photography-with-x.html

 

It will cost you pennies! Do this yourself!

 

Mitakon-20mm-f2.4-Super-Macro-580x720.jp

 

All you need is a wideangle lens and an inversion ring

 

31WvFi3xTwL._SY355_.jpg

 

 

https://www.amazon.com/Pixco-Reverse-Adapter-Fujifilm-X-Pro1/dp/B00BBPK2AQ

Edited by milandro
Link to post
Share on other sites

it is, but I am not sure in which way you find it interesting. ;)  :)

 

It is certainly interesting that a company puts out on the market a lens which does very little else than you could do yourself at very little cost.

 

So, yes, you can either buy the ready made lens or make your own.

 

All you need is getting hold of a CCTV lens and a couple of rings and you are in business.

 

You can do the same thing with a number of lenses really no need for a CCTV wideangle lens. This solution for super macro has been out there forever and you can find on line many resources on the matter, or you can buy the Zhongyi lens.

 

Whichever you prefer.

Edited by milandro
Link to post
Share on other sites

Both! I know a lot of Chinese companies sell rebranded and adjusted products but didn't know they'd even do something like this. That's also why I'm not keen on buying Chinese lens brands even though there might be some good products.

 

I also didn't know about the inversion ring. Something I might try in the future. I have a few older manual focus lenses lying around.

 

So, thanks  ;)

Link to post
Share on other sites

Cheers, it is a very old technique that they have revived.

 

There is nothing wrong in it other that with a few pennies you can do it yourself.

 

I am very happy to have bought many things that I couldn’t have found easily or cheap or made myself. Made in China or Russia.

 

So, the lens turbo by Zhongy is an excellent product ( I have 2) the tilt adapter by Kipon is great, the macro helicoid/adapter M42 Fuji Fx made by Pixco is very good too and the cherry on the cake the Petzval lens is superb.

Edited by milandro
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • FYI Update - I just learned that the Zoom F6 & F3 recorder/mixers also synch to the UltraSynch Blue over bluetooth. I am planning to record 32bit float on the F6 and it will have frame accurate matching time-code with my two-XH2S' and one XH2.
    • Hopefully these will help some. For quite a while now Apple has put stuff into their operating system so that you cannot yourself open the connected camera’s card and see the images, you have to use their or third party software to do that.
    • Thanks for the instructions:  I was doing up to 3 successfully but can't wait to get home and try  4 and 5 and report back. Cheers, John
    • Okay, just for completeness sake: 1.     The camera’s menu connection setting is USB CARD READER. 2.    The computer is turned on, booted and nicely operational. 3..    With the camera turned off, connect the camera to the computer using a known-to-be-good USB C data plus power cable (a data only cable should work as well, a power only cable will not work). 3.   The camera’s charging light may turn on. Turn the camera on. The back screen probably will show the USB symbol as well as the USB letters. 4.    Start up the Image Capture app and see if the camera’s name appears in the devices list. 5.    In the Apple menu, select ‘About This Mac’, click on the ‘More Info…’ button, and on the right hand side of the window that opens, at its bottom is a button called ‘System Report…’, click on it. A new window should open, the left hand side has collapsible dropdown listings, the first is called “Hardware’, within it is the USB listing, select that. The right side pane should give you listings of all the USB devices connected at that moment, one of them should say something like USB PTP Camera. Does either 4. or 5. work?
    • Thanks, Yes I knew about the USB issue in newer Macs and macOS but that is why I tested it with High Sierra as well. Also the fact that every other camera easily connects via USB direct with the camera - definitely points out the fact that it is a FUJI specific problem.  Furthermore - I remember being able to direct connect early last year. I rarely take the Cards OUT of the camera  these days. The weird thing is I can connect my iPhone 15 via USB-C to 100s and pull files directly - puzzling. Problem is FUJI rarely listens to anyone.    
×
×
  • Create New...