Jump to content

XT5 setup F+Raw and Recipes

Chris.Massa

By Chris.Massa
in Fuji X-T5 / Fuji X-T50

 Share

Recommended Posts

NACarter Rookie

NACarter

Posted
Posted

Hi Chris. The settings, such as a recipe, will affect the JPG preview/thumbnail that is saved with the raw image. Also, if you import your raw images into Lightroom you can "develop" the raw with the camera settings which will give you something similar to what it looked like in the camera with the recipe. It won't be exactly the same as Lightroom doesn't have the exact same film simulations.

Nick

Link to post
Share on other sites
SergePhoto Rookie

SergePhoto

Posted
Posted

The IQ (recipe) settings do not affect RAW files except for the Dynamic Range (DR) setting, which may force a higher ISO (DR200 requires base ISO x 2, DR400 requires base ISO x 4). Since a basic exposure parameter is affected, this does propagate to the RAW file. Please note that as mentioned above, Lightroom's Camera Profiles for the X-T5 do have film sims but (a) they're not necessary exactly the same as the built-in ones, and (b) they do not account for the other IQ settings such as tone and clarity. Those you will have to apply to the RAW file yourself in Lightroom. Capture One seems to have the closest approximations of the Fuji film sims, but again, you have to apply the other settings using the software sliders. If you're interested in keeping everything 100% Fuji, try the Fuji X RAW Studio software, which lets you play around with all of the IQ settings on your computer (but you do have to have your camera plugged in and USB set to BACKUP mode). This is the software a lot of people use to design new recipes.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Giampaolo Masserano
      Looking for Full Frame lenses to adapt to GFX

      By Giampaolo Masserano · Posted

      I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...