Jump to content

X-H2s Major HDMI Bug

FrannyBoy
 Share

Recommended Posts

FrannyBoy Newbie

FrannyBoy

Posted
Posted (edited)

When I plug my X-H2s into a DJI Transmission system transmitter, the camera starts power endlessly power cycling. I get an image when I plug the X-H2s directly into the DJI transmission monitor, but I can’t get an image on some of my other monitors. I’m really surprised Fuji hasn’t fixed this, as people have been complaining about this same issue since the camera released. We need a fix for the buggy HDMI

My workaround has been to run the signal through a blackmagic hdmi to sdi converter box but it’s a janky solution. Fuji really needs to fix this

Here’s a video of the issue: 

 

Edited by FrannyBoy
More Accurate Description
Link to post
Share on other sites
Don Barar Contributor

Don Barar

Posted
Posted

There are other bugs as well.  I frequently mount my X-H2S on an RS2 with RavenEye.  When I select record on the RS2, the camera records initially, but then stops.  I then have to push the record button again to initiate recording.  My understanding is that the same thing happens with the RS3/RavenEye.  The original firmware that came with the camera when I purchased in August 2022 did not do this.  But somewhere in 2023 and the release of firmware version 3.xxxxx this problem cropped up.  It is very annoying.  But at least there is work around.

Don Barar

Link to post
Share on other sites
  • FrannyBoy changed the title to X-H2s Major HDMI Bug

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Giampaolo Masserano
      Looking for Full Frame lenses to adapt to GFX

      By Giampaolo Masserano · Posted

      I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...