Jump to content

Recommended Posts

Hello guys,

Im about to buy an Fujifilm X-H2. I just wondered if there's any Gimbals that are compatible? The Ronin Gimbals never show the Fujifilm X-H2. Does anybody have experience or does anybody knows which Gimbals could work? budget ist around 2-400€s or 500 and i get it used :)

Best

 

Link to post
Share on other sites

  • 1 month later...

Just wondering if you got anywhere?  I have the DJI RS3 Mini and it works OK, but there are 2 annoying issues:

1) the gimbal record button will sometimes start recording for around 2 seconds only, and then stop. This happens around 25% of the time.

2) manual focus using the gimbal dial is possible, but unusable as the focus will often overshoot the intended focus point - even with the gimal on its lowest sensitivity and smoothness settings.

Link to post
Share on other sites

  • 2 weeks later...

I am using a X-H2S with my DJI RS2.  What happens is this.  Select record button.  Record starts for about 2 seconds then stops.  Select record again and the camera will continue to record.  Happens almost every time, except when I initially start the camera, then it will stay recording with the first selection of record.

Interesting that the RS3's have a similar issue and this has not been resolved.  Since this was not an issue with my X-T3, I have to assume this is a FujiFilm firmware issue with the X-H2 series cameras.  But I doubt this will ever get fixed by FujiFilm.

Don Barar

Edited by Don Barar
Link to post
Share on other sites

  • 1 year later...

I know this is an old thread but the gimbal situation for Fujifilm cameras is terrible. It's that bad that I would not recommend people buying into the Fuji system if their man thing is shooting video on a gimbal. As a Fujifilm shooter since 2011, I feel bad having to say that, but here's why....

I'm a photographer that also shoots around six to ten videos per week, all on a gimbal. I've shot video on the X-T3, X-T4 and now the X-H2. I think it was around 2020 when I bought a Weebill S. All was good and I used that until the Weebill 2 came along. On the Weebill S, I can control exposure compensation by rotating the rear thumb dial, which is something I need to do to adjust exposure on the fly as it's a smooth transition (unlike aperture). The S also has a record button that works. But on the Weebill 2, there is no way to adjust the exposure compensation and the record button is extremely stiff and works intermittently. Sometimes you end up starting the video at what you think is the end of the shot. I persevered with the 2 for a few months and then gave up. I went back to the S, burned it out and then had to buy another S because there wasn't a single gimbal out there that could give me a record button that works and a EV comp.

So it's 2025 and my second Weebill S is on its last legs and struggling to stay level (some of my clips look like they were filmed on the Titanic). I really don't want to buy a gimbal that was released at the start of this decade, but I can't find a single one from any manufacturer that will work. Fujifilm get blamed a lot for not opening up their system, but at the same time, if the Weebill S can still control my X-H2, then DJI, Feyutech, Zhiyun etc obviously can do it, but choose not to.

Or maybe I just keep Fuji as my personal cameras, but switch to something else for work. I've wrote to various gimbal manufacturers, but their replies are useless. I can't be the only one with this problem, right?

Rant over.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...