Jump to content

Manual focus ring not working

John Gray

By John Gray
in General Discussion

 Share

Recommended Posts

John Gray Rookie

John Gray

Posted
Posted (edited)

I'm new to Fuji.   I have the X-T5 with a 16-80mm lens.

When I set it to Manual focus, the lens ring does absolutely nothing.  I've gone through the settings, manual, watched video after video and I can't figure out why it's not working.

Is there something else to do other than switch to Manual focus to get the ring to work?  I must be missing something obvious.

Thanks

Edited by John Gray
Link to post
Share on other sites
Blue Zurich Enthusiast

Blue Zurich

Posted
Posted

My single issue with Fuji menus is  there are multiple settings which control singular functions such as MF. It looks as if you know where to check, i.e. MF assist, AF + MF, the MSC dial etc. One thing I have found is fat fingering the lower SS dial to movie instead of stills or the lower iso dial to CL.  I hope you figure it out, it's probably simple, usually is.  Unless you missed one of the things I listed above, lol.

Link to post
Share on other sites
  • 1 month later...
Cynthiaa Newbie

Cynthiaa

Posted
Posted

Here are a few things you could check that might be causing the issue:

  1. Camera Mode: Ensure the camera itself is in Manual mode, not just the lens. Sometimes, even if you switch your lens to Manual, if the camera is in an auto mode, it may override manual focusing.

  2. Focus Mode Selector: Make sure the focus mode selector on the front of the camera is set to "M" for manual.

  3. Focus Ring Direction: In the X-T5's settings, there's an option to change the direction of the manual focus ring. You might've accidentally reversed it, causing confusion. You can check it under Menu > AF/MF Setting > Focus Ring Operation.

  4. Function of the Lens Ring: Sometimes, the lens ring might be set to control another function like aperture or zoom, and not focus. Confirm this under the Menu > Button/Dial Setting > Ring Function Setting.

  5. Firmware Update: Make sure both your camera and lens have the latest firmware updates. Occasionally, these issues can be solved with an update. You can check for updates on Fujifilm's official site.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • PoorAlchemist
      LUT doesn't works on resolve

      By PoorAlchemist · Posted

      I found the reddit topic i refere to :  https://www.reddit.com/r/davinciresolve/comments/1pc3f1e/cant_apply_new_fujifilm_gfx_55_lut/ "Update for y'all, It's just like what @ExpBalSat said, it's because of the backslashes in the names break them. I changed the file name and it works now. "   For me it was the solution. Realy annoying if it doesn’t work for you 😕  
    • Don Barar
      LUT doesn't works on resolve

      By Don Barar · Posted

      Here is the solution to using the Eterna 55 file simulation LUTs in Davinci Resolve.   In general, do not use the FLog2C to film simulation LUTs as they are not supported by Davinci Resolve for two reasons: 1) Davinci Resolve does not support Fuji Gamut Color Space and 2) Davinci Resolve does not support FLog2C gamma.  Instead, use Flog2 which is supported by Davinci Resolve.  Here is an example.  Let's say that you want to use Classic Chrome simulation.  Do the following: Complete your color grade and use a CST to get to Rec 709. Add a node.  Use a CST to convert from Rec 709 to FLog2.  Output Color space is Rec 2020 and Outout Gamut is FLog2. Add a node.  Apply the FLog2 to Classic Chrome LUT Create a combination node from node in steps 2 and 3. Apply a Key to the combination node and adjust the Key Output Gain to get the amount of the combination node that you want applied. So that you do not have to do this over and over again, generate a LUT for the combination node.  Remember to turn off all other nodes before generating the LUT. Hope this helps others. Don  
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      Thanks for the insights. I think it's really hard to make a decision without having the two side by side! 
    • George_P
      Please save me from insanity 23mm f2 vs F1.4r

      By George_P · Posted

      I don’t have the 23 f2 but I have read several times that it is considered a little soft at close distance, compared to the 23 f1.4 lenses. These will also focus at shorter distance from the subject, esp. the new one. So that might make a difference. The new 23 f1.4 LM WR  has better resolution, esp. in regard to the 40Mpix sensors, which you don’t have on the X-T2. What practical difference that makes for the value of the pictures one makes is disputable and subjective.  f1.4 will gather more light but with a smaller DOF, which may be desirable in some situations but not so in others, depends. If you like to shoot close ups, you will probably use higher f numbers to get a bigger DOF. Same for landscapes. If you are a bokeh fan, yes the f1.4 lens are better.  The older 23 f1.4 lens that you are considering is a very good and respected lens. The f1.4 vs f2 aperture per se is perhaps not so important. The 23 f2 is very small, light and practical and a great lens for travel and landscapes. So, go figure. I am afraid I just sent you further down the road to insanity !
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      First post here but long time fuji shorter. I use the XT2 with the 23mm f2 / 35mm 1.4 / 16-80mm f4 I'm considering the 23mm f1.4 r (Non-WR) About me: - I shoot black and white only. - I like macro details to wide open landscapes and everything in-between. - I shoot mostly for art, intrigue and creativity of the image. My question - is the 23mm f1.4 going to offer me any meaningful difference over the f2 for the above scenarios Thanks and sorry for bringing it up again...
×
×
  • Create New...