Jump to content

Black line/dots on the image

mardokondo

By mardokondo
in Fuji X-T2 / Fuji X-T20

 Share

Recommended Posts

mardokondo Newbie

mardokondo

Posted
Posted

Hi All!!

Im new user here. I've found forum when I was searching for the information regarding camera sensor. I have some some strange lines on my X-T2's. I have unmounted lens from the camera, taken photo- and I'm sure that the problem is in camera itself. I have tried different F numbers- do not influence into the lines. Maybe someone of You have meet such a strange lines?

Maybe it's scratched camera sensor or it's a bad pixel- I can not see this defect on the camera sensor- looks like there is no dust, no scratch.

I have tried also pixel mapping but it doesn't help, or maybe I'm doing it wrong.

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites
jerryy Grand Master

jerryy

Posted
Posted

There is actually a thin protective glass piece over the sensor. If you have tried using sensor swab cleaners, — these clean the outside of that glass — then you may need to have camera repair clean the inside of the glass. That black thing looks like some kind of dust.

Link to post
Share on other sites
mardokondo Newbie

mardokondo

Posted
  • Author
Posted

Thank You. It's good news. I hope that it is only dust. But for sure, camera needs to go for service. I've asked Fujifilm Poland, but I need to wait for reply.

Firstly I was thinking that it might be a scratch or pixel defect, but irregular shape in magnification seems to me that it is a dust.

....but camera itself- perfect for me together with 35/1.4:)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Giampaolo Masserano
      Looking for Full Frame lenses to adapt to GFX

      By Giampaolo Masserano · Posted

      I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...