Jump to content

Latest lenses on "old" camera

dclement
 Share

Recommended Posts

dclement Rookie

dclement

Posted
Posted

Hello dear forum members,

I have an "old" X-Pro2 and absolutely no plan to replace it with an X-Pro3.

However, some of the latest lenses really say hello to me, e.g. the 18/1.4 (most certainly), and perhaps the upcoming 33/1.4.

Do you think these newer lenses will work well on the X-Pro2 without a (highly unlikely) firmware update?

TIA - best regards, Daniel

Link to post
Share on other sites
dclement Rookie

dclement

Posted
  • Author
Posted

Thanks for replying, I really do hope it will work straight OOTB. I'll keep an eye on the firmwares when these new lenses hit the market. But I've got the feeling that the X-Pro2 is about at the end of its rope with respect to firmware updates (no more memory?...) OTTH, I'm not after the ultimate AF speed, just the hassle-free use of a recent lens (with weather sealing!)

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • jmm123
      GFX 100s not connecting to Mac via USB-C

      By jmm123 · Posted

      Wow Jerry, Simply Wow and thanks: I switched off camera. Connected Cam to Mac with USB-C Switched on cam Looked at system report which said Camera PTP Then opened up Image Capture (I never even knew IC was still on the latest macOS) and the files on the GFX showed up. Then opened up LR and FINALLY GFX images showed.   Interestingly like all the cameras - You don't get to navigate to the /DCIM folder - but that's no big deal. *** But for the exercise I tried this on my Intel MacBook Pro running Monterey - but no luck there with the above steps (No big deal). I hav Eno idea how this even started to work - Is it the process of Looking at Sys Report or Just the fact that I opened it on Image Capture   OR that I Connected first THEN Switched on the camera.  What actually made it work? The Irony is I don't think Fuji Support in Aust have any idea about this as they have been stumped over this for the last few months.   Thanks Again  - truly appreciated!! John  
    • DMJpix
      Time Code Synch

      By DMJpix · Posted

      FYI Update - I just learned that the Zoom F6 & F3 recorder/mixers also synch to the UltraSynch Blue over bluetooth. I am planning to record 32bit float on the F6 and it will have frame accurate matching time-code with my two-XH2S' and one XH2.
    • jerryy
      GFX 100s not connecting to Mac via USB-C

      By jerryy · Posted

      Hopefully these will help some. For quite a while now Apple has put stuff into their operating system so that you cannot yourself open the connected camera’s card and see the images, you have to use their or third party software to do that.
    • jmm123
      GFX 100s not connecting to Mac via USB-C

      By jmm123 · Posted

      Thanks for the instructions:  I was doing up to 3 successfully but can't wait to get home and try  4 and 5 and report back. Cheers, John
    • jerryy
      GFX 100s not connecting to Mac via USB-C

      By jerryy · Posted

      Okay, just for completeness sake: 1.     The camera’s menu connection setting is USB CARD READER. 2.    The computer is turned on, booted and nicely operational. 3..    With the camera turned off, connect the camera to the computer using a known-to-be-good USB C data plus power cable (a data only cable should work as well, a power only cable will not work). 3.   The camera’s charging light may turn on. Turn the camera on. The back screen probably will show the USB symbol as well as the USB letters. 4.    Start up the Image Capture app and see if the camera’s name appears in the devices list. 5.    In the Apple menu, select ‘About This Mac’, click on the ‘More Info…’ button, and on the right hand side of the window that opens, at its bottom is a button called ‘System Report…’, click on it. A new window should open, the left hand side has collapsible dropdown listings, the first is called “Hardware’, within it is the USB listing, select that. The right side pane should give you listings of all the USB devices connected at that moment, one of them should say something like USB PTP Camera. Does either 4. or 5. work?
×
×
  • Create New...