Jump to content

Filmsimulation Custom Settings Lightroom

Clood08

By Clood08
in Fuji X-T2 / Fuji X-T20

 Share

Recommended Posts

Clood08 Newbie

Clood08

Posted
Posted

Hello everyone,

I have searched the forums but I haven't found an answer to my question, so here goes. 

I have c1-c7 mostly with different versions of Classic Chrome and Acros+R. Now I use the App to transfer the Jpegs to my phone.

First Question: do my photos taken with one of the custom settings for film sims keep their settings when send to the phone via the App? Second question: do they also keep their settings when I want to edit the jpegs further in Lightroom mobile. Or is everything reset to the standard profile? 

I really want to edit my photos just a bit based on the custom settings that I set in camera for the film Sims.

Cheers in advance

Link to post
Share on other sites
Greybeard Experienced

Greybeard

Posted
Posted

It would appear the answer is yes in both cases - as you are transferring jpgs the conversion to the film simulation and jpg settings have already taken place in the camera.

If you shoot raw and transfer the files directly (either by card reader or wifi) then you have the flexibility to change film simulation and other jpg settings on the phone.

Link to post
Share on other sites
Clood08 Newbie

Clood08

Posted
  • Author
Posted

Thank you very much for this info. That is good news. It would have been really annoying if all my custom settings to the film Sims would have been lost while transferring the jpegs. It took quite some time to fine tune the film sims to my liking

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...