Jump to content

Recommended Posts

Hey Guys, 

I've been lurking on the forums since I picked up my X-T3 back in September. 

I've expanded my kit quite a bit and fell in love with the images people were getting with the Hellios 44-2 lenses. After watching a bunch on eBay I read on another forum about people having really bad luck with auction lenses... and a few recommended a specific seller from Amazon shipping from Kiev in the Ukraine. I bought a lens in "Very Good" condition from Amazon and when I received it I found the front element full of micro scratches(normal I assume for a vintage lens) and one large one deep enough to catch my finger nail on near the middle of the element. The rest of the lens appeared to be in great shape mechanically, and just had a bit of cosmetic wear. 

I corresponded with the seller and he seemed apologetic and said he really valued his reputation and wanted me to be happy so he'd send another lens and to ship the first to his friend in the states. Fast forward another 3 weeks and the second lens showed up. This one has zero scratches, but it either has a chip or what looks to be a defect on the surface of the outer glass. Similar to when a piece of weld splatter or a spark hits glass. Internally it also has what appears to be a speck of paint about the size of a pin head on the element. This lens looks like it was spray painted on the outside. One of the aperture blades is creased as well. I haven't mounted it on the camera yet to see what the image quality is like. I'm guessing it was opened up and refurbished and any scratches on the element have been polished off, but the other defect was too deep so they just gave up. I don't see any evidence of coatings left. Both the internal and external blemishes on the element are about 1/8" from the OD, so maybe they would get cropped out... I'm just a bit annoyed as this one is in worse overall shape than the first lens. 

The pictures I took with the first lens appeared to be pretty good. I didn't pixel peep at all though and only shot a handful of images. I haven't shot with the second lens yet. 

Am I being too picky? If these were auction lenses I wouldn't have bid on them in the first place if they were properly described unless they were cheap. I didn't pay a ton ($50 with the generic adapter), but I think pristine examples aren't much more if I'm patient. I'd be okay with more cosmetic wear as long as the glass was nicer and it was mechanically sound. 

I'm not sure if the seller is being honest or he's just trying to come off as caring hoping I just keep one of the lenses. I was just in Kiev and have a few Ukrainian friends and they would be the first ones to suspect the latter. They love to rip people off with a smile over there even more so than in America. Too bad I didn't know about the lens before my trip, I would have picked one up in person. 

Thanks, 

TFJ

Link to post
Share on other sites

The problem with the russian lenses is the qc. Also, they often store them inside a drawer. There are several sellers on the bay posting pics and you can check it out.
However it doesn't mean that a ding, a scratch, affect the final result. I have a Tair 133 that's great. It has a deep scratch on the rear lens, but on the pic you don't see anything.
One thing is be careful if you decide to open the lens, because the metal of screws on the barrel is very soft. You risk to ruin them with the screwdriver.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Thank you. I will research it.
    • Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...