Disappearing Shutter speed display in aperture priority 100S

[MaurizioS]

Last time I powered on the camera, I noticed that when in aperture priority the display of shutter speed disappears. Same if I go to speed priority, the F display disappears. Until last time I used the camera everything was fine. They now both only appear when in manual. I went through every possible menu but could not solve the problem. any help? Thank you.

[JandB]

I have the same issue with the X-S20.  The only way to get the shutter speed and aperture to display at the same time is in manual. Aperture priority = no SS display unless AEL/half press. SS priority = no F display. Other than wait for a Fuji rep response, have not figured out how to solve the problem either.

[JandB]

I think I found the answer to our problem.  Change Dynamic Range from Auto to 100, 200, or 400%.  This worked for me, and the shutter speed now displays in Aperture Priority mode.

Good Luck

[Bobby D]

I had the same problem with my xt5, moving the dynamic range from auto to 100, 200 or 400 brought back all parameters to the screen with half depressing the shutter, thank you!