Jump to content

Lens advice

Jamila

By Jamila
in Fuji X-T3 / Fuji X-T30

 Share

Recommended Posts

Jamila Newbie

Jamila

Posted
Posted (edited)

Hello, I would like to have your advice regarding specific lens for my Fuji xt-30. 
Could you give me an advice what type of lens would be the best for macro photography (jewellery product pictures) considering reasonable amount of money?
Or maybe there is no need for macro lens specifically but some zoom lens which could be useful for me in different type of shooting as well?
Thanks for your response!

Edited by Jamila
Link to post
Share on other sites
jerryy Grand Master

jerryy

Posted
Posted (edited)

I do not think you will have to use a macro lens to get great shots of your jewelry, but it does not hurt.

Fujifilm has three macro lenses that will work with your camera; the XF 30mm macro, the XF 60mm macro and the XF 80mm macro. The 30mm and the 60mm usually are priced about the same, you just need to check around. The 80mm is the more expensive of the bunch, you may be able to get a low priced used copy. All three lenses get decent reviews.

I am going to include a link to a chart that shows how much magnification the XF lens get with Fujifilm extension tubes. Using one of those with your current lens may  enough.

https://dl.fujifilm-x.com/global/products/accessories/mcex/pdf/macro-extension-x-global.pdf

For third party lenses, there is the Zeiss Touit 50mm macro lens, other folks may list other suggestions.

p.s. Welcome to the forum.

Edited by jerryy
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • jerryy
      Fungus

      By jerryy · Posted

      A fungus in the forest.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

      (p.s. Open Topic.)  
    • Don Barar
      LUT doesn't works on resolve

      By Don Barar · Posted

      The backslashes you are referring are just symbols denoting path.  Once you import into these LUTS into Davinci Resolve those backslashes are removed by default and you only see is the true file name which has no backslashes.  Convince yourself of this by opening the LUT folder from the Davinci Resolve Project Settings.  Do you see any backslashes in those LUT names? Of course not.  The only name you see is the one that has the underscores and the periods. These LUTS work as designed without having to change any path names.  However, they need to be set up properly through CSTs and by what is supported in Davinci Resolve.  Hence, the FLog2C film simulation LUTS cannot be used because Davinci Resolve does not support Fuji Gamut color space and the FLog2C gamut. Alternatively, Davinci Resolve does support Flog2 film simulation LUTS because the color space for FLog2 is Rec 2020 and there is an FLog2 gamut. If all you are doing is changing the path names then you are not getting the correct results.
    • PoorAlchemist
      LUT doesn't works on resolve

      By PoorAlchemist · Posted

      I found the reddit topic i refere to :  https://www.reddit.com/r/davinciresolve/comments/1pc3f1e/cant_apply_new_fujifilm_gfx_55_lut/ "Update for y'all, It's just like what @ExpBalSat said, it's because of the backslashes in the names break them. I changed the file name and it works now. "   For me it was the solution. Realy annoying if it doesn’t work for you 😕  
    • Don Barar
      LUT doesn't works on resolve

      By Don Barar · Posted

      Here is the solution to using the Eterna 55 file simulation LUTs in Davinci Resolve.   In general, do not use the FLog2C to film simulation LUTs as they are not supported by Davinci Resolve for two reasons: 1) Davinci Resolve does not support Fuji Gamut Color Space and 2) Davinci Resolve does not support FLog2C gamma.  Instead, use Flog2 which is supported by Davinci Resolve.  Here is an example.  Let's say that you want to use Classic Chrome simulation.  Do the following: Complete your color grade and use a CST to get to Rec 709. Add a node.  Use a CST to convert from Rec 709 to FLog2.  Output Color space is Rec 2020 and Outout Gamut is FLog2. Add a node.  Apply the FLog2 to Classic Chrome LUT Create a combination node from node in steps 2 and 3. Apply a Key to the combination node and adjust the Key Output Gain to get the amount of the combination node that you want applied. So that you do not have to do this over and over again, generate a LUT for the combination node.  Remember to turn off all other nodes before generating the LUT. Hope this helps others. Don  
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      Thanks for the insights. I think it's really hard to make a decision without having the two side by side! 
×
×
  • Create New...