Jump to content

XT-5 slightly warm in hand - is it normal?

jan_fuji

By jan_fuji
in Fuji X-T5 / Fuji X-T50

 Share

Recommended Posts

jan_fuji Newbie

jan_fuji

Posted
Posted

Hello everyone, 

I just received my XT-5 and I'm enjoying it quite a bit. One thing is bothering me though. It feels like it gets slightly warmer after a couple minutes of stills shooting in AF-C. Noticeable specially behind the display. It's quite subtle, no heat warning or anything but I never noticed that with my X-H2. I've run some tests with 4K/60fps and my XT-5 shut down after 60 minutes on "high" heat setting and 30 minutes on "normal". 

So my question is, is it normal for XT-5 to get slightly warmer after shooting stills? Thanks! 

Link to post
Share on other sites
  • 2 weeks later...
David01 Rookie

David01

Posted
Posted

Hello,

Congrats on your XT-5.Glad to hear you're enjoying it. Now, I completely understand your concern about your camera getting warm after extended use especially when taking continuous autofocus (AF-C) shots. It's perfectly normal and is a natural outcome of your camera's processor and sensor working hard to get those perfect focus shots.

Your XT-5's built-in safety features will automatically shut the camera down should it detect any overheating. Based on your tests, it looks like your camera is working perfectly fine.

To prevent any possible overheating issues, I suggest adjusting some settings such as reducing the time your camera stays on standby mode or turning it off between shots. You could also avoid using the "high" heat setting for an extended duration and take some breaks between long sessions to let your camera cool down.

Link to post
Share on other sites
  • 3 months later...
Keith Selle Newbie

Keith Selle

Posted
Posted

I have Fujifilm X-H1, X-H2S, X-T3 and X-T5. The only camera that overheat so easily is the X-T5. Firmware is all up to date. I live in the hot dry Las Vegas weather. A few seconds after I pull the X-T5 out of my camera bag and started shooting outside, it overheat and shut down. I'm fine in this 105 to 110 degree weather but this camera can't handle it. This issue needs to be addressed by Fujifilm soon. I'm running out of patience. I love the X-T5 but this is killing me.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Don Barar
      LUT doesn't works on resolve

      By Don Barar · Posted

      Here is the solution to using the Eterna 55 file simulation LUTs in Davinci Resolve.   In general, do not use the FLog2C to film simulation LUTs as they are not supported by Davinci Resolve for two reasons: 1) Davinci Resolve does not support Fuji Gamut Color Space and 2) Davinci Resolve does not support FLog2C gamma.  Instead, use Flog2 which is supported by Davinci Resolve.  Here is an example.  Let's say that you want to use Classic Chrome simulation.  Do the following: Complete your color grade and use a CST to get to Rec 709. Add a node.  Use a CST to convert from Rec 709 to FLog2.  Output Color space is Rec 2020 and Outout Gamut is FLog2. Add a node.  Apply the FLog2 to Classic Chrome LUT Create a combination node from node in steps 2 and 3. Apply a Key to the combination node and adjust the Key Output Gain to get the amount of the combination node that you want applied. So that you do not have to do this over and over again, generate a LUT for the combination node.  Remember to turn off all other nodes before generating the LUT. Hope this helps others. Don  
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      Thanks for the insights. I think it's really hard to make a decision without having the two side by side! 
    • George_P
      Please save me from insanity 23mm f2 vs F1.4r

      By George_P · Posted

      I don’t have the 23 f2 but I have read several times that it is considered a little soft at close distance, compared to the 23 f1.4 lenses. These will also focus at shorter distance from the subject, esp. the new one. So that might make a difference. The new 23 f1.4 LM WR  has better resolution, esp. in regard to the 40Mpix sensors, which you don’t have on the X-T2. What practical difference that makes for the value of the pictures one makes is disputable and subjective.  f1.4 will gather more light but with a smaller DOF, which may be desirable in some situations but not so in others, depends. If you like to shoot close ups, you will probably use higher f numbers to get a bigger DOF. Same for landscapes. If you are a bokeh fan, yes the f1.4 lens are better.  The older 23 f1.4 lens that you are considering is a very good and respected lens. The f1.4 vs f2 aperture per se is perhaps not so important. The 23 f2 is very small, light and practical and a great lens for travel and landscapes. So, go figure. I am afraid I just sent you further down the road to insanity !
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      First post here but long time fuji shorter. I use the XT2 with the 23mm f2 / 35mm 1.4 / 16-80mm f4 I'm considering the 23mm f1.4 r (Non-WR) About me: - I shoot black and white only. - I like macro details to wide open landscapes and everything in-between. - I shoot mostly for art, intrigue and creativity of the image. My question - is the 23mm f1.4 going to offer me any meaningful difference over the f2 for the above scenarios Thanks and sorry for bringing it up again...
    • DavidJohn
      Unmarked government installation

      By DavidJohn · Posted

      I discovered this unmarked government installation today.  

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...