X-H2s - Mic volume ignores memorized setting. (???)

[RuiBit]

I'm a videographer. I have an internal and external micro configured in Manual -30db mode (low sensitivity).
Every time I turn on the X-H2s, the micro works in Automatic mode (image 1), ignoring the saved manual adjustment, being necessary to enter the volume adjustment menu (image 2), not changing anything, then exiting again to for Manual mode to work (image 3).

I compared two clips in an editing program (image 4), the first one on the left, I didn't go to the micro's menu. In the second, from the right, I went to the menu and came back.

It also happens with an external microphone. I have a extrenal wireless microphones and this manufacturer recommends reducing the camera input volume so that the sound does not clip.

Please, help me, because it's very annoying to have to change the menu every time I turn on the camera, a bigger problem if I forget.

 

 

 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Edited January 6 by RuiBit

[RuiBit]

I already have the solution!! :)) Check it out!...

Until now I had the camera in these settings:

video mode:
Internal Mic Level Adjustment: -30dB
External Mic Level Adjustment: -30dB

Photo mode:
Internal Mic Level Adjustment: AUTO
External Mic Level Adjustment: AUTO

What did I modify?:

video mode:
Internal Mic Level Adjustment: -30dB
External Mic Level Adjustment: -30dB

Photo mode:
Internal Mic Level Adjustment: -30dB
External Mic Level Adjustment: -30dB

Easy Pisy

Now, when I turn on the X-H2s, the micro is immediately in Manual mode, in my case, with low sensitivity.

I hope this experience of mine helps you in a similar case! Well act everyone, and like this thread, THX