Jump to content

Recommended Posts

I am a beginner in photography, starting with the XT30ii with the 18-55mm kit.

I have been learning basic photography and enjoying it very much. I photograph mostly dogs and other animals as a hobby.

I am going on a safari trip soon and I have been searching a lot on what camera lens makes sense. I am looking for a lens good enough for wildlife photography but not so heavy weighted. The 100-400mm seems heavy and not for a beginner like me. I am not sure about the 50-140mm, it seems lighter but I am afraid it might still be too “pro”. I am willing to learn but I don’t want to start with something inadequate when I am still learning all the technical concepts.

If anyone has any advice, I d appreciate it.

Thank you

Edited by auxaurores
Precision
Link to post
Share on other sites

Do not let the “pro” idea stop you from getting the tool you need for the job. Each lens has it’s own learning curve, a 23mm is not less professional than the 50-140mm because it is lighter or has a shorter focal length.

You did not mention what type of photos you want to get; landscapes with the notable starring critters being proportionally small, or close up portraits of the critters.

The folks leading the safari probably will try to keep you safe, but those critters are not house pets, nor are they zoo pets. Stay safe and keep your distance by using the “reach” longer lenses give you. 600mm with 1.4x or 2x teleconverters will get you those portraits without disturbing the critters. As will 300mm or 400mm or … or any of the longer end of the zoom ranges. Even a 55-200mm lens will work toward that idea.

These are not so much “pro” as they are tools that you use to get the photos, some you will like better than others. As far as heaviness goes, put them on a tripod, turn off OIS or IBIS and get the shot.

Link to post
Share on other sites

  • 3 months later...

I have a pair of X-T30-II's as they are light and dependable. I mainly use fixed focal length lenses, the more compact Fujifilm ones. However, for longer reach I have been using the 100-400 Fujifilm zoom. Yes, it is not the lightest but it is quite well made and works well for me, even though I don't like zooms very much. I picked mine up from a reputable e-bay seller,, and it works fine. The lens stabilization works well even though the body doesn't have IBIS. I'm not entirely sure what the "Pro" designation on some of the lenses Fujifilm makes as plenty of my compact fixed focal lengths don't have it on them and they are superb pieces of glass. Frankly, if it works for you I'd just ignore the "marketing" labels.

Now 400 mm doesn't seem like it has that much reach, but remember this will be the equivalent of 600 mm for a full frame digital or 35 mm film camera. 10 years ago, unless you were a professional photographer hiring obscenely expensive lenses, 600 mm was a very long lens for anyone to own. That is a lot of reach. Anything more than that is going to be substantially larger, probably heavier and with less light transmission, oh and very much more expensive.

I like the 100-400 mm a lot, especially for the money, and it gives me very reasonable results. I'd take mine with me on a safari any day. I think you will be able to keep far enough away from the big kitties to stay safe. I use mine with a mono-pod quite often, and with the lens stabilization is turned off.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • A fungus in the forest.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

      (p.s. Open Topic.)  
    • The backslashes you are referring are just symbols denoting path.  Once you import into these LUTS into Davinci Resolve those backslashes are removed by default and you only see is the true file name which has no backslashes.  Convince yourself of this by opening the LUT folder from the Davinci Resolve Project Settings.  Do you see any backslashes in those LUT names? Of course not.  The only name you see is the one that has the underscores and the periods. These LUTS work as designed without having to change any path names.  However, they need to be set up properly through CSTs and by what is supported in Davinci Resolve.  Hence, the FLog2C film simulation LUTS cannot be used because Davinci Resolve does not support Fuji Gamut color space and the FLog2C gamut. Alternatively, Davinci Resolve does support Flog2 film simulation LUTS because the color space for FLog2 is Rec 2020 and there is an FLog2 gamut. If all you are doing is changing the path names then you are not getting the correct results.
    • I found the reddit topic i refere to :  https://www.reddit.com/r/davinciresolve/comments/1pc3f1e/cant_apply_new_fujifilm_gfx_55_lut/ "Update for y'all, It's just like what @ExpBalSat said, it's because of the backslashes in the names break them. I changed the file name and it works now. "   For me it was the solution. Realy annoying if it doesn’t work for you 😕  
    • Here is the solution to using the Eterna 55 file simulation LUTs in Davinci Resolve.   In general, do not use the FLog2C to film simulation LUTs as they are not supported by Davinci Resolve for two reasons: 1) Davinci Resolve does not support Fuji Gamut Color Space and 2) Davinci Resolve does not support FLog2C gamma.  Instead, use Flog2 which is supported by Davinci Resolve.  Here is an example.  Let's say that you want to use Classic Chrome simulation.  Do the following: Complete your color grade and use a CST to get to Rec 709. Add a node.  Use a CST to convert from Rec 709 to FLog2.  Output Color space is Rec 2020 and Outout Gamut is FLog2. Add a node.  Apply the FLog2 to Classic Chrome LUT Create a combination node from node in steps 2 and 3. Apply a Key to the combination node and adjust the Key Output Gain to get the amount of the combination node that you want applied. So that you do not have to do this over and over again, generate a LUT for the combination node.  Remember to turn off all other nodes before generating the LUT. Hope this helps others. Don  
    • Thanks for the insights. I think it's really hard to make a decision without having the two side by side! 
×
×
  • Create New...