Jump to content

WASTE OF POSSIBILITIES ON FUJI SYSTEM

maniquet

By maniquet
in General Discussion

 Share

Recommended Posts

maniquet Newbie

maniquet

Posted
Posted

Most of programming task is about setting CONDITIONS versus ACTIONS:

in case:
  • ( C=1 then A:=A1)
  • ( C=2 then A:=A2)
  • ( C=3 then A:=A3)
end case
 
On Fuji cameras, if you configure button B to do A1 and that A1 can occur only in condition C1, button B does nothing when C=2. That’s a huge waste of possibilities.
Example: Fn1 button=select Film Simulation. Film simulation is not available if mode dial is set to Adv.1. Then the button does nothing. Why not use it to bring the list of Advanced Filters?
There is no question about if it’s possible to do that or not: If the program can set the button to NOT bring the Film Simulation list when the mode dial is not on the proper position, then it can set it to do something else.
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Neil Rosenberg
      Infrared Photography on X-E2 665nm

      By Neil Rosenberg · Posted

      I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Tschortschli
      Screen is flipped with fan001

      By Tschortschli · Posted

      Hy there When Im using the fan001 on the XH2s and I flip the LCD Screen vertically by 180 degrees then the image flips vertically, what is good but it also flips horizontally. The clean feed on HDMI is not flipping horizontally but its also flipping if the HDMI output info display is on. When I unmount the fan then the image flips only vertically. My firmware is updated to the latest version. Any ideas if there is a fix for that?
    • Neil Rosenberg
      Infrared

      By Neil Rosenberg · Posted

      In reply to the original question, it all depends on what you mean by infrared.  If you mean "see thermal information", then I agree with the comments here.  However, if you mean near-infrared, the X-T4, or basically any digital camera can be modified to "see" it.  Check out Lifepixel.com and Kolarivision.com for more info. As regards lenses, I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Greybeard
      XS10 and manual lenses

      By Greybeard · Posted

      No - I don’t think so - it means you can take pictures if you remove the lens completely - but I’m not sure that is a problem
    • mcewena
      XS10 and manual lenses

      By mcewena · Posted

      I bought a manual lens over xmas and it took me a while to find the "shutter w/o lens" function in the menu settings.  So far I haven't found a way to either put that on the Q menu or marry that setting to one of the 4 custom modes.   Am I missing something? Is there a problem if I just leave that setting enabled even when the OEM auto lens is in place? tia
×
×
  • Create New...