Jump to content

X-Pro 2 Issues

IdiotBug
 Share

Recommended Posts

IdiotBug Newbie

IdiotBug

Posted
Posted

Hey all, new to the forum. Had a question for X-Pro 2, and Fuji users in general, I guess, haha.

Just got into photography this past year. I bought my X-Pro 2 secondhand back in August. It’s been a joy to use. Great condition and worked perfectly but recently (the past few weeks) I’ve been running into a problem where the camera will intermittently shut off and won’t turn back on again unless I remove and reinsert the battery. Even then, it sometimes won’t turn back on again and it’ll take a few tries to get it running again.

It will also sometimes shut off and reset everything while switching between LCD/OVF/EVF.I haven’t dropped it or taken it out in extreme weather, or anything. Using fully charged, Fuji batteries, compatible SD cards, etc. Have updated the firmware, and factory reset it a few times.

Just today, even, when the camera was briefly working, I tested a few shots and the shutter seemed to get stuck a few times then turn off. 

I’m more than likely going to send it in for repair (hoping they actually have parts for such an old camera) but was wondering if anyone else has ever had these types of issues with their X-Pro 2? Or might have any ideas as to why these things are occurring. Thinking it could be anything from a shutter problem to an internal power problem. I have been using Urth adapters for experimenting with various manual prime lenses (not sure if that would cause any issues). 

Appreciate any info! Thanks.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • DavidJohn
      Bob

      By DavidJohn · Posted

      Bob is a well-known and much appreciated street performer, musician, comedian, and sometime circus performer. GFX100RF.  3200 ISO   1/60 sec.  f4.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • Greybeard
      Spots on my every images

      By Greybeard · Posted

      If the spots are in the same place every time then its likely a dirty sensor - you can buy a sensor cleaning kit and do it yourself or take it in to get cleaned professionally.
    • JacopoAlfonzo
      X-T50 Bug: First Shot Overexposed after Startup

      By JacopoAlfonzo · Posted

      Hi everyone, I am experiencing a persistent and frustrating issue with my Fujifilm X-T50 and I’m looking for advice to understand if this is a known firmware bug or a mechanical defect requiring service. When I turn on the camera and take a picture immediately in Manual Mode, the first frame is significantly overexposed. Any subsequent shot taken immediately after is perfectly exposed, even though the settings (ISO, Aperture, Shutter Speed) have not changed.  The issue is intermittent. It stopped happening for a period but has recently started occurring again. Also the problem does not persist when i am using electronic shutter but on this side i'm still conducting some tests trying to switch between ES and MS. I've checked many times all the settings like PREVIEW EXP./WB IN MANUAL MODE / NATURAL VIEW, i'm sure those setting aren't the causing the issue.  It happens with both: Fujinon XF 18-55mm (Digitally controlled aperture). Meike 35mm (Fully manual/analog aperture with no electronic contacts). Since it happens with the manual Meike lens, I believe we can rule out lens communication issues. Has anyone else experienced this first shot overexposure on the X-T50 or similar X-Processor 5 bodies (X-T5/X-H2)? Given that it happens with a manual lens, I suspect this might be a mechanical shutter issue or a firmware initialization bug where the sensor gain isn't resetting fast enough at boot. The two pictures i have attached show the problem at the same settings, the image is simply overexposed no other artifacts or strange colors. Should I send it in for warranty repair immediately, or is there a known firmware workaround? Thanks for your help!

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • MRT21
      Spots on my every images

      By MRT21 · Posted

      Hi everyone, I’m hoping you can help me with an issue I’m having with my images. Every photo I take with my Fujifilm X-T2 has visible spots on it (as shown in the attached photo). Because of this, I have to spot-heal all my images in Lightroom just to remove the spots, which is very time-consuming. I’d really appreciate any advice or suggestions on what might be causing this and how I can fix it permanently. Thank you so much for your help!  

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • abmet
      Non zero shutter count on new camera

      By abmet · Posted

      Like jerryy said lithium batteries are shipped partially charged. Do you have ibis turned on, and is it set to continuous or shooting only?  If continuous that could be the noise you hear.   I’d also contact Amazon on the shutter count and missing wall plug. 
×
×
  • Create New...