Jump to content
  • Similar Content

    • By Gareth 32
      Does the Xs 10 have the Dual Iso at 640 and 2000? I can't see the difference in noise reduction when it comes to 2000 and Im wondering is it a defect of the camera or is there a setting that I've to turn on. That's if the Xs 10 even supports it in the first place. I'll be thankfull for any feedback because I've been racking my brains trying to work it out. Thanks
    • By ErezM
      Hi guys,
      Before I'm taking my XT3 for repair, making one last check:
      My ISO dial apparently stopped working - the ISO level is on 320 and turning the dial just won't do anything anymore.
      Also, tried to set the command dial to change the ISO with no luck, and I'm pretty sure I've adjusted everything correctly in the menu.
      The only time the ISO DO change is when I put the camera in F-LOG, then it changes to 640.
      Any ideas? I'm pretty lost here.  
    • By matsonfamily
      What real-time exposure display options are available with manual lenses?  I am investigating Fuji, with an X-T1 and a manual lens (no contacts).  I want to see what ISO and SS my camera has chosen, with the current lens settings.  (I would also like to use program shift to change the ISO/SS combination up or down.)  There may just be some setting somewhere that I didn't think applied to this?  I have turned on all the display options and have tried the different displays, but no ISO or SS displayed unless I manually set them, or if I depress the shutter [but that's not real-time, as I change the aperture ring].  I have the newest firmware, and I have reset my camera's settings several times, so almost all my settings should be at the defaults.

      I am very used to Olympus OM-D E-M1.  On my OM-D camera, as I reduce the aperture on the lens, I see my ISO 200 / SS 1/30 move, maybe to 200 & 1/15.  Then if I move it further, maybe this time it changes the ISO to 400 and keeps the SS at 1/15... but I see it all change as I move the aperture.  If there's no clicks then I see it make minute even fractional changes to ISO & SS.  Program shift via the front dial will also change the ISO/SS up and down.
    • By Brewzzer
      Hello everyone, pardon me if this is a newbie question but in my fuji X-T3, the minimum ISO for movie/video mode is 1000 and it seems that I can't turn it lower than that. Does the camera detect the ambient lighting and keep the value to 1000 or is it because of the lens that I'm using? (which is fuji xf 18-55mm f2.8-4 by the way) or maybe there is a way that I can change that in my settings? Thank you in advance for your feedback.
    • By stevem44
      Hi,
      I tried to adjust the command rear dial for ISO, but was not successful.
      I went through the correct procedure: Wrench, Button dial settings: command dial settings: back dial setting: ISO.
      I was able to change it for exposure compensation but not not for ISO.
      Any help would be appreciated.
      Thanks,
      Steve
  • Posts

    • After upgrading my iPhone to IOS 15 the Cam Remote app fails to connect to the camera (X100V). Re-installed the app - no change. Anyone with the same issue, and hopefully a solution?
    • No, perhaps I was not clear. Just about the only thing that keeps you from using es is having a flash unit attached. I regularly use electronic shutter with very long exposures when I am outdoors, it saves wear and tear on the mechanical shutter. So something else is going on. Try a full reset and see if that clears it up as well as making sure you have the latest firmware installed. Having tethering would be nice, but Fujifilm seems to have saved that for the X-T3, X-T4, etc.
    • Ah, that's probably what it is then - I'm using a slow exposure and no flash. I just have the 1st and 3rd options on my menu. I bought a mirrorless camera because I thought it would be better than my dslrs but it's pretty useless for what I wanted it for. No live view/tethering  And can't even use the electronic shutter  Yet I can take a 4k video. It doesn't make sense that I can do that but can't take a still.  Louise  
    • That is odd, there are very few other settings that limit using es. Having a flash unit attached is one, but I would have thought that would also keep you from using ms+es. Mines does this: Have you upgraded to the most recent firmware? This may sound drastic, have you copied you settings down somewhere and tried a full reset?
    • Thanks for the reply. I don't have that choice in my x-t30 menu  It's just MS or ES/MS with ES for fast exposures i.e. 1/4000s Louise
×
×
  • Create New...