Jump to content

XC35 F2

patyuile

By patyuile
in Fuji X Lenses

 Share

Recommended Posts

AndyH44 Apprentice

AndyH44

Posted
Posted

Your X-T10 and X-T2 are probably well worn by now and lenses will probably feel more loose on them than on a newer body.  Also, having a plastic mount, the XC 35 generally feels not as tight as metal mount lenses.  Don't worry about it. 😉

Link to post
Share on other sites
  • 4 months later...
patyuile Newbie

patyuile

Posted
  • Author
Posted
On 6/14/2020 at 1:37 PM, AndyH44 said:

Your X-T10 and X-T2 are probably well worn by now and lenses will probably feel more loose on them than on a newer body.  Also, having a plastic mount, the XC 35 generally feels not as tight as metal mount lenses.  Don't worry about it. 😉

Hi thanks for that I would agree the XT10 is well used but my well used XC16-50 doesn't move and I have just bought an XT30 and the XC35 has the same movement on this as it has on my XT10 and XT2

Link to post
Share on other sites
  • 1 month later...
J. XT10 Newbie

J. XT10

Posted
Posted
On 6/12/2020 at 10:05 AM, patyuile said:

I have just bought an XC35 F2 and have noticed that it is loose (you can move it slightly) when mounted on both my XT10 and XT2 anyone else have this issue or is my lens faulty?

Mine is just heard some little noise while I engage and unengage the auto focus. Dont know if it is common or not?

Just got a new one today. I noticed stronger chattering when I switch on and off the camera. I can see and hear it happens when I enter and out the gallery as well.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Posts

    • Giampaolo Masserano
      Looking for Full Frame lenses to adapt to GFX

      By Giampaolo Masserano · Posted

      I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...