solidsilver

Sorry I can't remember

From memory, as I did the fixes upon release, I think the screw was either a bit to long for the depth of the hole and/or the material acting as a bush between the camera and diopter is too soft/spongy. I just packed it out and made mine stiff.

Yep - but are sure that you have the correct driver or you will take the black paint off the screw.

Any use for xpro 2?

O ring came as a spare in a shutter button pack. So not very big at all. I got a black plastic one for cheap off amazon.

Fixed mine today... Got a torx 2 driver, actually came with an iPhone screen replacement. Need a small rubber o ring about the size of the number 0 here. Unscrewed the dial, fitted the o ring and screwed tightly back together. 2 mins maximum. No wobble and the diopter works fine. How it should have been in my eyes. If you look under the diopter dial there is a foam washer embedded into it. It is too soft and doesn't stop the movement. Another alternative I was going to do was to shorted the screw holding it all together. But seeing as my fix worked for me I left that. Hope that helps.

I sort of use RAW as my back up, but use JPEG as my go to file, to browse and to share. JPEG are on slot 2, but the rear viewer always defaults to slot 1. I like to select by default which card is the default for the rear display. Geolocations - it needs an option to forget a location rather than menu digging or letting it time out. Basically a reset location option in the quick menu. Delete JPEG and RAW File associated with it option. In camera raw editing needs a micro adjustment/degree rotate on the rotate option. Just to straighten photos. They also need to do some work on Camera remote, after any action you have to reconnect.

me too. Black tape is my dodgy fix