TomazDrnovsek

My camera started to act really strangely when focusing. Instead of me trying to explain it I just made a video (sorry for the quality but I think it's obvious): https://photos.app.goo.gl/r6fgJzkGVEHtKk1s9 Pay attention to focusing. The f-stop was f/11! It's happening the same on any f-stop setting and I tested it with two lenses. I also factory reset the camera. What do you think could be the issue?

In my case, the other lens is the kit lens and it works. I sent the faulty lens for repairs.

I have X-T5 and 33mm f1.4 lens. Suddenly I started receiving this message. When I try to focus the message appears and the moving part in the lens starts moving if I tilt and move the camera as the focusing magnet stops working. When I restart the camera it works again for a short period of time but then it happens again. It's almost guaranteed to happen if it's harder to obtain focus, like shooting into the light etc. What could be the issue here?

No, I only see it outdoors in the bright sun light.

Boost.

I'm just curious if this is normal behavior or not. When the aperture is wide open (f/1.4) or around that when I half-press the shutter button (AP mode for example) the display starts flickering (about 3 times per second). If I start closing the aperture it stops at some point, usually around f/1.8. This is my second lens. With my first lens, FUJINON XF18-55mmF2.8-4, this never happened. So, I'm just wondering if this is just the camera trying to get the right exposure in this weird way or is there an underlying issue?