Jump to content

slow autofocusing with the Fuji 50mm f2 near the MFD


stevem44

Recommended Posts

Hi,

I am considering buying the Fuji 50mm f2, which generally has had excellent reviews: very sharp, good microcontrast, close focusing ability, fast autofocus, light weight, relatively inexpensive, etc.

However, some users have reported that the autofocus was very slow close to the minimum focusing distance. Have others also experienced this problem? I have read about a similar problem (focus hunting) on the Fuji x-forum, which was attributed to Fuji's 3.0 firmware update, in which the problem was resolved when camera was returned and the 2.1 firmware was installed. Regarding the focus hunting problem, it was mentioned that Fuji knows about this problem, which will be resolved in a future firmware update. Should I wait until this problem is resolved or do most people think that this is a permanent problem.

Thanks

Link to post
Share on other sites

I have no definitive information to impart. But my impression has been that the complaints of hunting with the new firmware are specific to using AF-C with apertures of f/9, f/10, and f/11. With the older firmware, phase-detect AF is still used at those apertures with AF-C. With the new firmware, contrast-detect (hunting) AF is used at those apertures in AF-C. This is (again, my impression) unrelated to focusing distance -- just to selected aperture. As to whether this will be fixed in a firmware update, that probably depends a lot on whether the newer f/11 PDAF limit was abandoned in favor of the older f/8 limit for a reason, or if that was just a mistake.

Be aware that even phase-detect has its limitations. When you're shooting at MFD at f/8 or wider, your depth of field is typically going to be thin. When the camera tries to AF, it's possible that the target is initially so out-of-focus that the camera can't make it out. In that case, Fuji does a three-step PDAF: it focuses to distance (near infinity), then close-up (near MFD), then to the focus distance it's determined. WIth some lenses, this can look like hunting (with LM lenses it usually just looks like a shimmer when focus locks on). And there's the standard caveat for all OSPDAF systems to date: if the camera can't get a good image to PDAF from, it always reserves the right to switch to contrast-detect (hunting) AF.

Edited by Doug Pardee
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • I didn't use cascable... stayed with just the two fuji apps
    • Buttons Fn1 and Q stopped working
    • Because the sensor assembly is moved electrmagnetically. When there is no power it is essentially free moving.
    • Hi everyone I have a problem while using my xpro3 and strobes, from a day to an other I started to have a black shade on the side of my ID photos so it's kind of problematic. It's like if the speed is to high except it happened even at 1/30s. And the shutter speed seems accurate with ambiant light so I'm a bit disturbed about all of this.   Anyone has an idea about that case ?
    • Ahoy ye hearties! Hoist ye yon Jolly Roger and Cascade away. NGC 1502 The Jolly Roger Cluster:

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

      This is the equivalent of 43 minutes, 40 seconds of exposure. NGC 1502 is a neat little cluster located in the Camelopardalis Constellation. This region of space was thought to be fairly empty by early astronomers, but as you can see, there is a lot there. Kemble's Cascade (a.k.a. Kemble 1) is named for Father Lucian Kemble, a Canadian Franciscan friar who wrote about it to Walter Scott Houston, an author for the Sky And Telescope magazine. Houston named the asterism for Fr. Kemble and the name "stuck". NGC 1501 is the Oyster Nebula. A longer focal length telescope is needed to bring this one into good viewing range, but it is well worth the effort. NGC 1502: https://skyandtelescope.org/online-gallery/ngc-1502/ Camelopardalis Constellation: https://en.wikipedia.org/wiki/Camelopardalis Kemble's Cascade (and NGC 1501: The Oyster Nebula): https://www.constellation-guide.com/kembles-cascade/ Arrrrrr Matey.
×
×
  • Create New...