Jump to content
  • Similar Content

    • By widespace
      Hello
      I bought a new Fuji X-T3 and went to take some pictures, JPG + RAF.  I used two SIM cards (one as a backup).  When I got back home, I started uploading all of them to my computer (Mac).  I removed the main SIM card from the camera and plugged it into a multi/card reader, the same way I always do.  There were in total: RAF = 147 photos, and JPG = 159 photos.  I was able to upload: RAF = 75 photos (51%), and JPG = 117 photos (74%).  After those photos were uploaded, an error message appeared in the screen: THE FINDER CAN’T COMPLETE THE OPERATION BECAUSE SOME DATA IN (NAME OF THE NEXT PICTURE) CAN’T BE READ OR WRITTEN. ERROR CODE -36.  No more photos were uploaded, even when I tried several times.  I also tried doing the process one photo at a time, and also repeated the process with the second SIM card.  Same results.
      Thinking that the two SIM cards were corrupted or damaged at the same time (???), I then tried to format and take some more pictures with another SIM card and to upload them to the computer.  The same situation and exact message came up over.  I am able to see all the pictures (RAF & JPG) directly from the SIM cards connected to the Mac, I just can’t upload them to it.  My frustration is that 51% of the RAF, and 74% of the JPG photos were already uploaded using the same method, devices, computer, etc., without any problem, and then just stopped.
      What can I do or check for?  Is that something to do with the way the camera store the photos in the SIM card?  Again, it performed as expected PARTIALLY, and then stopped!
      Thank you for your advise.

    • By hillytimes
      My X-Pro2 isn't giving me the option to switch between Jpeg to RAW/Jpeg, within 'image quality' I'm just given 'Normal' and 'Fine'. Can anyone help?
      thanks :)
       
       
    • By KateB
      On some cameras, there is an option to take your shot in RAW as well as JPEG.
       
      One tutorial I watched for the T-T20, implied that you can only shoot in RAW or JPEG and not both at the same time. Is this correct?
    • By rytmenpinne
      Can some kind soul(s) who own the T2 post some downloadable, full resolution, low light and high iso SOOC's ?
       
      I'm investigating if getting the new sensor in one of it's 3 packages is worth it or not. I'm a JPEG heretic who often ends up taking event pics in very dark conditions. I very much dislike the excessive smudging of the X-T10's noise reduction, I have found ways to improve the images by boosting microcontrast with various sharpening techniques. But the few images I've seen that are confirmed SOOC and high iso in low light, do look promising, even usable up to 12800 whareas the t10's are _barely_ usable @ 6400
       
      Thank you very much for your time!
       
      Edit: Please also state your NR level! preferably @ -4, and use whatever Film simulation you wish. Also turn of the grain effect.
      Edit2: I'd prefer wide angle shots as these are generally sharp across the frame and better reveal the NR smudging..
       

    • By trektrekker
      Dear Fuji-friends. When shooting in fine or normal image-quality with my x100t, I somehow get a "red"-ish flair on the pictures. No matter what film simulation i choose. The raw version of the same shot, is exposed normally. I am really struggeling finding the answer. Anyone having knowinghow to solve this, and what to do?
      Thx in advance, and sorry about the poor english. 
       
  • Posts

    • I must have activated the wrong setting because now when I switch to the OVF the white windows stays for a second and then completely disappears. Any idea how to get it back? Thank you all so much. 🙂
    • No thunder stolen. If you read to the end of my article you'll see (in the section "Resources") I have a link for Simon Weir's site. I also have two other links on there with various IR tests. My article is only Fuji-centric because that is my system of choice though I've done a ton of IR work with Sony FF as well. I consider the sites for which I provide links to be complementary and I wish there were more sites out there evaluating for infrared. Although I test for infrared quite thoroughly I can only afford so many lenses. The eight Fuji mount lenses shown in my article I bought myself. In fact, same with the Sony and Micro 4/3 with the exception of the two Sony APS-C zooms that were rented. Also when I get new lenses, I'll update the article on my blog. I can't update the PetaPixel one as they just republished what was on my blog at the time. I have recently shot with the Voigtlander Nokton 35mm f1.2 Fuji-X and 7Artisans 35mm f0.95 Fuji-X. After trying 2 samples of the Voigtlander I returned them both but mainly for their strange and unacceptable (for my work) performance with resolution. Regarding IR, the Voiglander is free of hotspots from 1.2 through about f3.5. I'm impressed with the 7Artisans overall but it only works for IR at wider apertures (f0.95 through about f2.8.) Then again that's why you buy an f/0.95 lens. Thanks for the feedback. Happy shooting! Joel
    • Yes I don’t blame you. I’ll always have some Fujifilm gear. But if they don’t upgrade their gear in the next 3 months I’m going to go back to Canon for a lot of my work. I really love Fujifilm for all the right reasons but it’s faults are getting in the way of my work at this point.
    • You're welcome. I still use my X-Pro2 for personal work every now and then, but I replaced the X-H1 (and the rest of the Fuji-kit) with a Z7II-based kit and I'm very satisfied with that move.
    • That’s a lot of great info. I’m gonna explore those options. I don’t really wanna get an XT4 at this point. (Come on X-H2!) Thanks!
×
×
  • Create New...