I wanna buy X-T3, but only can afford used one. What should I check first, and what any other possible weak points of camera in term of use etc, which I should be aware of?
I'm interesting also in evf behavior in low light (my previous experience with 2.36 evf in other camera in low light was a bit painful, a lot of digital noise so I barely was able to (manually) focus), and since I like to shoot in low light, what's the possible slowest shutter speed I can get without blur handheld with 50mm f/2 wr lens, for example? And generally, how good non ois wr lens and is lack of ois/ibis in low light is actually that important? I also heard couple doubtful messages about 50mm f/2 being "not that sharp".
Also, how much if any weather sealing gonna be affected after repair, after shutter replacement for example (and in any other cameras, not only Fuji)?
And the last question is, is there any simple and fast method to crop to 4:3 ratio in photo (I just prefer 4:3)? Like in camera menus or something, or at least to put on some framing grid etc (it's really simple in any post, but I wanna see my 4:3 during the actual photo shooting if it's possible)?
Afaik some other cameras have 4:3 mode, and I didn't find that Fuji have one and I hope it'll be someday implemented with firmware update.
Thanks for answers.
I'm having some weird issues with the Fringer EF-FX Pro II on my Fuji XT3 and I hope someone can help.
When using the adapter with my Canon and Sigma lenses the image on the camera LCD is not showing the correct depth of field for the selected aperture unless I half-press the shutter button.
The dof in the image remains wide open unless I half-press the shutter.
The exposure of the image is shown correctly and changes accordingly when changing the apertue on the lens, the aperture numbers on the screen also indicate the correct selected f-stop, but the dof in the image remains shallow, as if the lens is wide open, unless I half-press the shutter.
Half pressing the shutter also no longer affects the focus of the image.
I'm shooting in S mode with settings full manual- ss, iso, aperture.
I've formatted the camera, updated to the latest firmware in camera and adapter (1.7) and the issue still persists.
Is this there a menu fix I'm missing here? Has anyone else experienced this? Or is this possibly a Fringer issue?
Thanks for your help!
Is there a startup time difference between OVF and EVF on the XPRO3? I have the XT3 and wonder if there's a noticable difference between startup times between XT3 EVF and XPRO3 OVF.
Fujifilm website says XPRO3 startup is 0.4s vs XT3 0.3s but wondering about real-world experience and if there's a timing benefit to OVF.
Does anyone know with the current economy due to the pandemic if sales for cameras will go down?
I find it a bit odd that fujifilm ended their sales on March, right in the middle of the crisis (Can they really afford to only offer premium prices)?
Thanks for the replies!
yes, i was using the clarity setting (at +1) and setting it to 0 did fix the storing screen.
What still bugs me tho, is that when using other shooting modes even with clarity there is no delay. But that means its definetly a Firmware issue that is hopefully resolved soon.
im using a 128 GB Lexar 1667x sd card. its plenty fast and i have not encountered storage issues anywhere else so far.
I’ve had my X Pro 3 less than a week and went shooting today and noticed it was in OVF rather than EVF. Tried to switch back and nothing happened. Switched lenses, same thing. Took battery out and put it back in at recommendation of Fujifilm Customer Support, still the same. It won’t switch back to EVF. Anyone have any solutions before I go to the hassle of sending it back to B&H?