Jump to content

x-pro2 SD card full error


Recommended Posts

Hi. I have had consistent ease of use on this camera for a long time. Yesterday, I was shooting with a new Godox 685, alkaline batteries. Getting some very nice images. It just stopped shooting, saying the card was full. I put in another card, but the same error. "card no. "1, or 2" full". I reformatted both the sandisk 16g cards, but it isn't happy. Won't recognize these cards being formatted, which I did in camera. Everything else seems fine. At the time of the error, there was only one card in camera. It actually took one shot, after formatting cards. I'm not sure what to try

Link to post
Share on other sites

  • 2 months later...

1. Clean cards the with a pencil eraser and format and test them on a computer first to see if they are OK.
2. Then take pictures to see if OK.
3. Now Format in Camera and test again.
4. Test in each slot separately.
if cards fails in one slot but not the other that slot needs to be professionally cleaned (don't try this at home)
if the cards fail in both slots the camera firmware or hardware failed = service.

You can try resetting the camera first but there is no way of knowing if that would help.

Edited by asathor
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Looking more like the next Fuji camera we see will be an X-T50 but it is still a rumor and no specs have been published.
    • Hey guys, The shutter on/off button switch may be loose on mine. After turning camera on and pressing the shutter/holding close to the area, the camera will turn off and say 'sensor cleaning'. This doesn't happen if I'm shooting via touch screen at all. Everything else is functional. Anyone else experience this before? Would love a much cheaper fix since Fuji Canada just quoted me $700 CAD to fix it, and considering everything else is functional except that part I'm not even sure why MPMB Main Board parts is being replaced😕 I got no explanation from them either.
    • As far as I know the firmware is not country specific. Are you sure that the filename has not been changed ( I am told this can happen with mac os). That's the only thing I can think of.
    • My x-t5 does not exhibit the focusing switch behaviour as you report it, so that is very strange and indicative of a fault. It does not matter whether the flash is attached or not. Once you set the camera for your studio flash, say 1/250th at f5.6, the camera, which is showing you what you will get at that exposure without the flash, will show a black screen unless the ambient light is brighter than what you would typically get indoors. That is why, as Jerry says, you have to set preview exp/wb to off. I have set a button for this.
    • I connected to FRAME.IO a while back and it works fine, but the camera wouldn't connect to the internet all of a sudden today and would get stuck on the reset screen, including initializing and even switching USB Connection mode. Is anyone else experiencing the same thing?
×
×
  • Create New...