Jump to content

Blinking orange indicator--won't take photo

lwuerth

By lwuerth
in General Discussion

 Share

Recommended Posts

dfaye Enthusiast

dfaye

Posted
Posted

I'm not a tech expert, but these are the things I would try. (In fact you've probably already tried some of them, but here goes anyway.) First, I'd gently clean the contacts on the SD card, and also use a bulb blower or similar to clear any possible obstructions from the card slot. If you've got another SD card, maybe try that in case it was a card fault. (Some people have reported problems with certain brands of card: SanDisk are what Fuji recommends - and it should of course be UHS I (not II).) For good measure I'd also clean the battery contacts and make sure the battery compartment is clean.

Another possibility is that the camera is getting itself in a twist if too many things are set to auto. (It shouldn't happen, but sometimes it does!) So I'd try a fully manual setting: for the sake of argument, ISO 200, aperture f8, shutter 1/125, Dynamic Range 100, and put the drive dial on S - single shot. If that works, then the problem may just have been a passing glitch.

If none of the above works, then it may be time to get Fuji or a professional repairer take a look. Hope you get it sorted soon.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Posts

    • jerryy
      Fuji Flowers

      By jerryy · Posted

      Hello, If you look in the top right-hand corner of each posting, there should be three dots in a row, like this —>  …  <—, click on them and after a moment or twelve, a small menu should drop down from the dots, the last entry in the menu is ‘Edit’. Choose that and after a moment or three you should be in edit mode for that entry. Note: Only you can edit your entries.
    • Fujiron
      Fuji Flowers

      By Fujiron · Posted

      Jerry I found out it's a Cherry Blossom but I can't figure out how to edit it.
    • N3v3r
      xPro1 can't change aperture with fujinon 27mm

      By N3v3r · Posted

      Up
    • Astigmatism
      Advertisement

      By Astigmatism · Posted

      What is most ironic about this is that there must be many of us here that would be interested in significant ads about the products we're discussing. I would be. I normally hate ads, but relevant ones here would actually be somewhat welcome. What are the recent new Fuji product announcements? Is anybody offering a sale? How about 3rd party products? I mean, I actually want to spend money, more or less.
    • Astigmatism
      CANNOT BACKUP OR RESTORE X-T4 SETTINGS WITH FUJI X ACQUIRE

      By Astigmatism · Posted

      I don't think I have your answer, but it's worth trying. It's been a few days, are you still struggling with this? I've used Acquire (on an iMac) and an X-T4 (also an X-T5 and an X-T30 ii) and it worked, at least as far as backing up. No error messages, and a computer file with stuff in it. I understand you get an error message when you attempt to restore the camera from a backup, but, does it look to you like the backup phase is working? I mean, do you get a saved file and no error messages? Do you have any other Fuji cameras, and does it work for them? I have had problems getting Acquire to detect the camera. I did all manner of playing around with starting the software, plugging in the camera, and powering the camera on, in various orders (including what the instructions say). I always got it to work eventually, but it took lots of playing some times. Lately it fires right up. Somebody here commented on this difficulty and the security obstacles in the computer. Are you getting a connection easily, or after trying things, or not at all? Does Acquire show your camera model and the few settings it displays correctly?
×
×
  • Create New...