Jump to content

X-E3 with XC 15-45


Recommended Posts

My thinking exactly. I ordered this combo a few hours ago - should arrive tomorrow, and I'll post my first impressions soon after that. (I'm not a fan of power zooms, but the little 15-45 was so cheap as a kit zoom it seemed silly not to try it, and I've got a decent collection of other Fuji glass I can use if I don't like it.) Meantime, I too would like to hear of other users' experiences with this combo.

Link to post
Share on other sites

8 hours ago, dfaye said:

My thinking exactly. I ordered this combo a few hours ago - should arrive tomorrow, and I'll post my first impressions soon after that. (I'm not a fan of power zooms, but the little 15-45 was so cheap as a kit zoom it seemed silly not to try it, and I've got a decent collection of other Fuji glass I can use if I don't like it.) Meantime, I too would like to hear of other users' experiences with this combo.

Very much look forward to hearing about your experience!

Link to post
Share on other sites

I said I’d report back on my first few days with the X-E3/XC15-45 combo, and I’m delighted to say that it exceeds my expectations. I knew the camera would be excellent - I'd handled one in a store and had studied the manual online. It’s beautifully made, well-designed and light, and of course works perfectly with the full range of Fuji glass. I hadn’t been able to actually handle the little XC 15-45 PZ lens before buying, but it was so cheap when bought as part of a kit with the X-E3 that it seemed worth taking a risk (and reviews have generally been pretty favourable).

In fact, this lens is really very good indeed! It’s very sharp at all focal lengths/apertures, focuses close, has a nice overall rendering (rather like the much more expensive XF18-55), and gives a nice smooth rendering to out-of-focus areas. Distortion seems very well controlled, even in RAW files taken at 15mm, and so far I haven’t detected any fringing, either. The power zoom is much better than I thought it would be; slower than manual zoom, of course, but easy to get used to. A key feature for me is that it “remembers” its focal length setting when the camera is turned off (the lens retracts, then returns to its previous setting when you turn the camera on again). It has a 52mm filter thread and works quite happily with a filter attached.

This is a great combo for everyday carry, as an ultra-light travel set-up or, indeed, as backup for another camera/lens combination. I’ve spent today out in the countryside with my 80mm macro on my X-H1 and with the little X-E3/15-45 combo in the bag in case I needed some wider-angle shots: so much easier than changing lenses in a dusty field - and so much lighter than bringing my X-Pro2 along as the second camera! All in all, then, I'm very glad I made the purchase - and I think the kit price for the combo is a real bargain. (And maybe, now that the X-T3 is taking all the limelight, the price might come down even further!)

Just my few thoughts.

Link to post
Share on other sites

On 9/6/2018 at 4:28 PM, dfaye said:

I said I’d report back on my first few days with the X-E3/XC15-45 combo, and I’m delighted to say that it exceeds my expectations. I knew the camera would be excellent - I'd handled one in a store and had studied the manual online. It’s beautifully made, well-designed and light, and of course works perfectly with the full range of Fuji glass. I hadn’t been able to actually handle the little XC 15-45 PZ lens before buying, but it was so cheap when bought as part of a kit with the X-E3 that it seemed worth taking a risk (and reviews have generally been pretty favourable).

In fact, this lens is really very good indeed! It’s very sharp at all focal lengths/apertures, focuses close, has a nice overall rendering (rather like the much more expensive XF18-55), and gives a nice smooth rendering to out-of-focus areas. Distortion seems very well controlled, even in RAW files taken at 15mm, and so far I haven’t detected any fringing, either. The power zoom is much better than I thought it would be; slower than manual zoom, of course, but easy to get used to. A key feature for me is that it “remembers” its focal length setting when the camera is turned off (the lens retracts, then returns to its previous setting when you turn the camera on again). It has a 52mm filter thread and works quite happily with a filter attached.

This is a great combo for everyday carry, as an ultra-light travel set-up or, indeed, as backup for another camera/lens combination. I’ve spent today out in the countryside with my 80mm macro on my X-H1 and with the little X-E3/15-45 combo in the bag in case I needed some wider-angle shots: so much easier than changing lenses in a dusty field - and so much lighter than bringing my X-Pro2 along as the second camera! All in all, then, I'm very glad I made the purchase - and I think the kit price for the combo is a real bargain. (And maybe, now that the X-T3 is taking all the limelight, the price might come down even further!)

Just my few thoughts.

My sentiments entirely - I hesitated to buy the XC 15-45 PZ as some users were negative - however, I've been very pleasantly surprised by both the IQ and the power zoom - yes, I would have preferred a manual zoom but this lens is a lot better than my recent Sony RX100M3. When combined with the X-E3 it's a cracking lightweight combo.

Link to post
Share on other sites

  • 2 months later...
10 hours ago, RSH-Photography said:

I haven't actually seen this lens or handled it, but I wonder does this combination turn the X-E3 into anything like a pocketable camera? I have the 18-55mm lens but when I want to travel light, I mount the 27mm f2.8 lens and it does make the X-E3 fit into my pocket, but I miss the ability to go to a wider-angle..

 Total depth of the XE3/15-45 combo, from back of camera to front of lens cap, is around 9mm/3.5 inches. Still pretty small, and lightweight, but you need large pockets.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Posts

    • Has anyone successfully used pocket wizards with an XT5? I cannot get it to fire.  Do Fujis and pocket wizards get along? Thanks in advance for your wisdom on this, kind readers!
    • Grzegorz, Go to the Networking Setting in your camera menu (the last one at the bottom - unless you have a My Menu then that is the last one). There, go to Network Setting and choose the SSID (name) of your WiFi network, type in the password, choose "SET". If you have a functioning DHCP server on your network, the camera should get its IP address (and Subnet_Mask and Gateway). If not, you can enter these manually. It is a little tricky, there will be some zeros already here, move the cursor after the zero and use DEL to delete it and make space in the input fields for your own correct values. If you do not know what to enter, have a look at values in the network settings of your computer and use the same except for the IP address, try some fairly higher number, hopefully you hit an unused one. Usually the values would be something like IP: 192.168.1.188, Subnet Mask: 255.255.255.0, Gateway IP: 192.168.1.1  or something like that, take clues from your computer. The camera and computer must be on the same network. Then in Connection Mode on the camera, choose Wireless Tethering Fixed. And half-press the shutter to exit the menu and get in shooting mode. The red LED should be blinking. If you can look at your network devices, e.g. on your router, you should see the camera there. You can see check the camera settings in the camera menu in the INFORMATION item of the Network Setting menu to see the MAC address of your camera and look for it in the list of devices on your network.  Then use the tethering in your software, e.g. in Capture One. The camera may not show immediately, take a shot and then it should show in the list of available cameras. Good luck. Report back how did you fare.  PS If you have a Windows machine, you need to have Bonjour installed and running. Macs have it.
    • Hey all, I just got my first camera. The X-T30 II. It seems the Eye Sensor + LCD Image Display view-mode is doing the exact same thing as just the Eye Sensor view-mode setting. Any ideas why this is or what's supposed to be happening? Firmware Version: 2.04
    • What GordW said. You have to put the drive mode dial to "S" - Single Frame. If you have it on CL, CH, BKT or Panorama (or HDR), the Multiple Exposure option will be greyed out in the shootng menu. On my X-T5 it works in RAW + JPG and also in JPG only. When Multiple Exposure is switched on, the image quality cannot be set to RAW only. If it was set to RAW only before switching Multiple Exposure On, image quality defaults to RAW+Fine. The result is JPG. After each shot press MENU/OK and after the last one press DISP/BACK.  
    • Springtime is coming to the Norwegian fjords.  X-E4 with XC 15-45

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...