Grid 3x3

[rmorroni]

 

 

 

 

 

366/5000

 

Hello guys, how are you?

I just bought an X-PRO2 and I'm having a hard time putting the 3x3 grid on the LCD. I did this route exactly and even then it does not appear on the LCD, could anyone help me?

Go to Settings -> (wrench, last one) -> Screen Set-up -> Disp. Custom Settings (on second page, last one) -> EVF / LCD -> check "Framing Guideline"

Thank you!

 

PS: Sorry my english is not so good

[dfaye]

You could try this (which I seem to remember worked for me on a previous occasion): go to Settings (wrench) > Screen set-up > Framing guideline (second page), then change the setting from Grid 9 to one of the other two settings, then exit the menus; THEN go back in and change that setting it back to Grid 9.

On the Display Custom Setting menu you could also try unchecking the framing guideline box, and then re-checking it (although I guess you will have tried this).

It's as if these display settings sometimes get stuck, or maybe take a little time to register. Good luck, anyway!  

[rmorroni]

5 hours ago, dfaye said:

You could try this (which I seem to remember worked for me on a previous occasion): go to Settings (wrench) > Screen set-up > Framing guideline (second page), then change the setting from Grid 9 to one of the other two settings, then exit the menus; THEN go back in and change that setting it back to Grid 9.

On the Display Custom Setting menu you could also try unchecking the framing guideline box, and then re-checking it (although I guess you will have tried this).

It's as if these display settings sometimes get stuck, or maybe take a little time to register. Good luck, anyway!  

Tks @dfaye,  got it! 😃